Dec 30, 2009

♥Tickled Pink♥


Hello Friends! ♥
I'm Finally Back with another tut!
Finally after not having any MoJo,
I got the inspiration for this tag
From a wonderful friend and member of my forum.
Thank you so much Sally♥
I also had some issues with my new PC.
It's all good now! Yay!
Hope you all had a Wonderful Christmas!
And Have A Very Happy New Year!
Enough rambling...on with the tut! lol
Hugz to you all & TY for the awesome comments!
xoxoxox

Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way! :)
Enjoy!
Have A Blessed Day!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Koufay.
You must purchase a license to use this art.
You may do so at CILM
HERE

Supplies:
A tube of choice & Font of choice.
I used The NautiGal
Mask of choice.

Awesome Freebie Kit
Be My Valentine
From: Fantasymoments
HERE
Thank You!


OK..Ready?
This will be easy!

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all.
Resize a paper from the kit and paste into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Now resize and add the frame 77.
Grab your magic wand, click inside frame.
Selections>modify>expand 8. Next resize a paper
from the kit and add it as a new layer.
Selections>invert>delete.
Drag paper layer under frame.
Dropshadow frame.
Now the fun part as always.
Simply resize and add some flowers all
around the sides and bottom of the frame.
Add a bow at the top.
Dropshadow all as you go along.
Add your tube of choice and drag it just
under a few of the flower layers and dropshaow.
Erase any bits needed.
Add your Artist © and your Name and
WooT!! You Are Done!
See mine above or make it your own!
As always mine is just a guide.
X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 30, 2009
Any resemblance to another tutorial is purely coincidental.

Dec 24, 2009

♥Christmas Angel♥



Hello Again Friends!
Merry Christmas To You All!♥
I'm Finally Back with another tut!

Sorry I have been MIA. lol
Been so busy getting ready for Christmas..
and Hubby bought me a new puter!
It took me a few days to get it set up
and all my stuffs transfered over.
Remember to leave some LUV
If you are using/doing my tuts.♥
A Thank You goes a long way! :)
Enjoy!

Click tags to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Barbara Jensen.
You must purchase a license to use this art.
You may do so HERE


Supplies:
A tube of choice & Font of choice.
I usedBickhamScriptFancy2
Mask of choice.

Awesome Freebie Kit
From: Rena Designs
Winters Day
HERE
Thank You!


OK..Ready?

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all.
Resize a paper from the kit and paste into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Resize and duplicate the pine twigg a few times,
Making them different sizes. Mirror and arrange them as above.
Dropshadow as you go along.
Resize and add the ornaments under a few of the pine layers.
Arrange to your liking.
Resize and add the bow and the angels on top.
Now simply add your tube of choice
under the pine layers and dropshadow.
Add your Artist © and your Name and
WooT!! You Are Done!
See mine above or make it your own!
As always mine is just a guide.
Hint: X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 24, 2009
Any resemblance to another tutorial is purely coincidental.

♥So This Is Christmas♥



Hello Again Friends!
Merry Christmas To You All!♥
I'm Finally Back with another tut!
Sorry I have been MIA. lol
Been so busy getting ready for Christmas..
and Hubby bought me a new puter!
It took me a few days to get it set up
and all my stuffs transfered over.
Remember to leave some LUV
If you are using/doing my tuts.♥
A Thank You goes a long way! :)
Enjoy!

Click tags to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Barbara Jensen.
You must purchase a license to use this art.
You may do so HERE


Supplies:
A tube of choice & Font of choice.
I used Romance Fatal Serif
Mask of choice.

Awesome Freebie Kit
From:Em-Ka Designs
So This Is Christmas
HERE
Thank You!


OK..Ready?

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all.
Resize a paper from the kit and paste into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Resize and add te gold tree element.
Dropshadow all as you go.
Paste all as new layers.
Resize and add the gold swirl.
Rotate and place it to the left.
Resize a bauble and hang from it.
Duplicate the gold swirl and rotate 90%.
Place it at the bottom.
Now resize and add the red ribbon,
fence, then the tree and snowman.
Add a few of the white swirls. Rotate one.
Arrange all to your liking or see mine above.
Resize some of the Christmas Ornaments
and place as new layers on the tree.
Resize and add the snow sparkles.
Now add your tube of choice behind the snowman and the tree.
Dropshadow and erase any bits needed.
You can play around with this and make it how you like♥
Add your Artist © and your Name and
WooT!! You Are Done!
See mine above or make it your own!
As always mine is just a guide.
Hint: X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 24, 2009
Any resemblance to another tutorial is purely coincidental.

Dec 19, 2009

♥Crimbo Cutie♥


Hello Friends!
I'm Back again with another tut!
Hope you all are having a Wonderful Holiday Season!
Remember to leave some LUV
If you are using/doing my tuts.♥
A Thank You goes a long way! :)
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Elias Chatzoudis.
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
A tube of choice & Font of choice.
I used BickhamScriptFancy2
Mask of choice. I used a round one.

Awesome Freebie Kit
Candy's Crimbo Freebie
HERE
Thank You Diane!


OK..Ready?

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all.
Resize a paper from the kit and paste into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Now resize and add the frame.
Grab your magic wand, click inside frame.
Selections>modify>expand 8. Next resize a paper
from the kit and add it as a new layer.
Selections>invert>delete.
Drag paper layer under frame.
Dropshadow frame.
Resize and add the greens2 as a new layer.
Place it at the bottom, roate a little and dropshadow.
Duplicate then, Image>mirror.
Do the same with the greens 1.
Arrange them nicly at the bottom of the frame.
Add the bauble cluster to the right.
Add a few buttons as new layers to the left.
Dropshadow all as you go.
Resize and add the string above the greenery.
Now get creative and add some bows and baubles.
Resize and add a ribbon.
Place them all to your liking.
Add your tube of choice just under the leaves.
Dropshadow.
Add a few of the sparkles.
Add your Artist © and your Name and
WooT!! You Are Done!
See mine above or make it your own!
As always mine is just a guide.
Hint: X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 19, 2009
Any resemblance to another tutorial is purely coincidental.

Dec 17, 2009

♥Santa's Helper♥


Hello Friends!
I'm Back again with another tut!
Remember to leave some LUV
If you are using/doing my tuts.♥
A Thank You goes a long way! :)
Enjoy!

Click tags to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Barbara Jensen.
You must purchase a license to use this art.
You may do so HERE


Supplies:
A tube of choice & Font of choice.
I used a Peas Scrapbooking font.
Mask of choice.

Awesome Freebie Kit
From: Louise
FEERIE FESTIVE
HERE
Thank You!

Christmas Wordart From
Cupcake Sprinkles
HERE
Thank you Caitlin♥

OK..Ready?

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all.
Resize a paper from the kit and paste into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Now resize and add the frame.
Grab your magic wand, click inside frame.
Selections>modify>expand 8. Next resize a paper
from the kit and add it as a new layer.
Selections>invert>delete.
Drag paper layer under frame.
Dropshadow frame.
Resize and add the ribbon.
Resize and add the twiggs as a new layer.
Use your deformation tool to rotate.
Place them to the right.
Dropshadow all as you go.
Resize and add the frozen pine branch.
Image>mirror.
Now simply resize and add the
ribbons, and a few ornaments.
Rotate to your linking.
Play around with them.
See mine above as example.
Add your tube of choice just under the ribbon layer.
Erase any bits needed hanging over.
Dropshadow tube.
Add your wordart.
I colorized mine to match.
Add your Artist © and your Name and
WooT!! You Are Done!
See mine above or make it your own!
As always mine is just a guide.
Hint: X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 17, 2009
Any resemblance to another tutorial is purely coincidental.

♥Holly Jolly♥



Hello Again Friends!
I'm Back again with another tut!
Showing two examples!
Remember to leave some LUV
If you are using/doing my tuts.♥
A Thank You goes a long way! :)
Enjoy!

Calling All Taggers!♥
I Opened
A Brand New PSP Forum.
It is awesome! :)
I am Extending out an Invitation to all
of you Active PSPers to come join me!
A place to kick back, relax PSP,and
of course show off your creations!
We will have tons of tuts and challenges!
Win some tubes/tags!
Make some new friends! It will be fun! :)

Please do not join if you don't plan to participate. :)
Here is the link!
HERE
Hope to see you there!
Welcome to all the ones who have joined!:)
FYI: For the ones who joined and do not
Show or participate within 3 days will be removed.

Click tags to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Barbara Jensen.
You must purchase a license to use this art.
You may do so HERE

&
I am using the beautuful artwork of Elias Chatzoudis.
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
A tube of choice & Font of choice.
I used FuturistFixedWidth
Mask of choice. I used a round one.

Awesome Freebie Kit
From: Just So Scrappy
Scroll down a little.
HERE
Thank You!


OK..Ready?

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all.
Resize a paper from the kit and paste into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Now resize and add the frame.
Grab your magic wand, click inside frame.
Selections>modify>expand 8. Next resize a paper
from the kit and add it as a new layer.
Selections>invert>delete.
Drag paper layer under frame.
Dropshadow frame.
Next resize and add the tree and gifts to the right.
Dropshadow.
Resize and add the Merry Christmas Blocks.
Place them at the bottom.
Dropshadow.
Resize and add a Santa.
Place him to the left, standing on the blocks.
Dropshadow.
Resize and add a few ribbons.
Place to your liking and dropshadow.
Next add your tube of choice under the blocks layer.
Dropshadow tube and erase any parts needed.
Woo-Hoo! :)
Add your Artist © and your Name and
WooT!! You Are Done!
See mine above or make it your own!
As always mine is just a guide.

X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.

Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 17, 2009
Any resemblance to another tutorial is purely coincidental.

Dec 16, 2009

♥Bauble Beauty♥


Hello Again Friends! :)
I'm Back again with another easy tut!
Something Different!
Remember to leave some LUV
If you are using/doing my tuts.♥
A Thank You goes a long way! :)
Enjoy!
Have A Blessed Day!

Calling All Taggers!♥
I Opened
A Brand New PSP Forum.
I am Extending out an Invitation to all
of you Active PSPers to come join me!
A place to kick back, relax PSP,and
of course show off your creations!
We will have tons of tuts and challenges!
Make some new friends! It will be fun! :)

Please do not join if you don't plan to participate. :)
Here is the link!
HERE
Hope to see you there!
Welcome to all the ones who have joined!:)
FYI: For the ones who joined and do not
Show or participate within 3 days will be removed.

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Jennifer Janesko.
You must purchase a license to use this art.
You may do so at CILM
HERE

Supplies:
A tube of choice & Font of choice.
I used BickhamScriptFancy2
Light Mask of choice.

Awesome Freebie
Winter Wonders Ornaments
From: Irene Alexeeva Designs
HERE
Thank You!


OK..Ready?
This will be Super Easy!

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add another new raster layer.
Selections, select all.
Floodfill with a color from your tube or the ornament.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Next resize and add the ornament.
Add your tube of choice as a new layer.
Drag her underneath.
Erase any bits needed.
Now back to your mask layer.
Erase the part under the tube and ornament.
Add your Artist © and your Name and
WooT!! You Are Done!
See mine above or make it your own!
As always mine is just a guide.
Hint: X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 16, 2009
Any resemblance to another tutorial is purely coincidental.

Dec 14, 2009

♥Have A Sweet Christmas♥



Hello Again Friends!
I'm Back again with another tut!
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way! :)
Enjoy!

Calling All Taggers!♥
I Opened
A Brand New PSP Forum away from YUKU.
It is awesome! :)
I am Extending out an Invitation to all
of you Active PSPers to come join me!
A place to kick back, relax PSP,and
of course show off your creations!
We will have tons of tuts and challenges!
Win some tubes!
Make some new friends! It will be fun! :)

Please do not join if you don't plan to participate. :)
Here is the link!
HERE
Hope to see you there!
Welcome to all the ones who have joined!:)
FYI: For the ones who joined and do not
Show or participate within 3 days will be removed.

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Barbara Jensen.
You must purchase a license to use this art.
You may do so HERE


Supplies:
A tube of choice & Font of choice.
I used ChampionScriptPro a PTU Font
Mask of choice.

Awesome Freebie Kit
From: Seachelle Scraps
HERE
Thank You!


OK..Ready?
Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all.
Resize a paper from the kit and paste into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Now resize and add the frame.
Grab your magic wand, click inside frame.
Selections>modify>expand 5. Next resize a paper
from the kit and add it as a new layer.
Selections>invert>delete.
Drag paper layer under frame.
Dropshadow frame.
Resize and add the candy canes, tree, and holly.
Paste all as new layers.
Dropshadow all as you go.
Resize and add the snowballs and the sign,
or any other elements of choice.
Resize and add the snowflakes.
Place to your liking.
Next add your tube of choice
just under a few of the elements.
Dropshadow tube and erase any parts needed.
Add wording of choice to the sign.
Woo-Hoo! :)
Add your Artist © and your Name and
WooT!! You Are Done!
See mine above or make it your own!
As always mine is just a guide.
X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 14, 2009
Any resemblance to another tutorial is purely coincidental.

♥Button Belle♥


Hello Again Friends!
I'm Back again with another tut!
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way! :)
Enjoy!

Calling All Taggers!♥
I Opened
A Brand New PSP Forum away from YUKU.
It is awesome! :)
I am Extending out an Invitation to all
of you Active PSPers to come join me!
A place to kick back, relax PSP,and
of course show off your creations!
We will have tons of tuts and challenges!
Win some tubes!
Make some new friends! It will be fun! :)

Please do not join if you don't plan to participate. :)
Here is the link!
HERE
Hope to see you there!
Welcome to all the ones who have joined!:)
FYI: For the ones who joined and do not
Show or participate within 3 days will be removed.

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Barbara Jensen.
You must purchase a license to use this art.
You may do so HERE


Supplies:
A sitting tube of choice

Mask of choice. I used a round one.

Awesome Freebie Kit
From: Scrappassy Designs
HERE
Thank You!

Easy Peasy!
Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add another new raster layer.
Selections, select all.
Resize and paste a paper from the kit into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Next resize and add the round wordart as a new layer.
Resize and add the button as a new layer..
Resize and add a few bows.
Dropshadow.
Add your tube of choice as a new layer.
Dropshadow.
I used the Alphas for my name.
Add your Artist © and your Name and
WooT!! You Are Done!
See mine above or make it your own!
As always mine is just a guide.
Hint: X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 14, 2009
Any resemblance to another tutorial is purely coincidental.

Dec 12, 2009

♥Victorian Beauty♥



Hello Again Friends!
I'm Back again with another tut!
Was playing around and thought I would share♥
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way! :)
Enjoy!
Have A Blessed Day!

Calling All Taggers!♥
I Opened
A Brand New PSP Forum away from YUKU.
It is awesome! :)
I am Extending out an Invitation to all
of you Active PSPers to come join me!
A place to kick back, relax PSP,and
of course show off your creations!
We will have tons of tuts and challenges!
Win some tubes!
Make some new friends! It will be fun! :)

Please do not join if you don't plan to participate. :)
Here is the link!
HERE
Hope to see you there!
Welcome to all the ones who have joined!:)
FYI: For the ones who joined and do not
Show or participate within 3 days will be removed.

Click tag to get full view. of
You must have a working knowledge PSP.
I am using the beautuful artwork of Olivia.
You must purchase a license to use this art.
You may do so at CILM
HERE

Supplies:
A image of choice & Font of choice.
I used Romance Fatal Serif
Brush or Wordart & Mask of choice.

Awesome Freebie
Victorian Holiday Cluster Frame
From: Rasberry Road Designs
HERE
Thank You!


OK..Ready?
This will be super Easy!

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add another new raster layer.
Selections, select all.
Floodfill with a color from your tube or the frame.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Next resize and add the frame.
Add your tube image of choice as a new layer.
Drag her under the frame.
Earse any bits needed.
Add some brush or wordart of choice.
Add your Artist © and your Name and
WooT!! You Are Done!
See mine above or make it your own!
As always mine is just a guide.
Hint: X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 12, 2009
Any resemblance to another tutorial is purely coincidental.

Dec 11, 2009

♥O Holy Night♥


Hello Again Friends! image
I'm Back again with another tut!
Thank you CuddleBeez for the Inspiration for this tut!
David Felps is also my fav and I just Love his O Holy Night.
He Sings it with Perfection! Like An Angel!
I have added the U Tube video at the bottom of the
page as well as to my new Christmas Songs playlist.
Be sure to check it out! Enjoy!

I was cleaning/organizing my Tags.
Rut Ro!
Sorry about some of My Photobucket links.
Some older tuts now do not have a preview:)
I will try to replace them for you.

Calling All Taggers!♥
I Opened
A Brand New PSP Forum away from YUKU.
It is awesome! :)
I am Extending out an Invitation to all
of you Active PSPers to come join me!
A place to kick back, relax PSP,and
of course show off your creations!
We will have tons of tuts and challenges!
Win some tubes!
Make some new friends! It will be fun! :)

Please do not join if you don't plan to participate. :)
Here is the link!
HERE
Hope to see you there!
Welcome to all the ones who have joined!:)
FYI: For the ones who joined and do not
Show or participate within 3 days will be removed.

Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way! :)
Enjoy!
Have A Blessed Day!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Barbara Jensen.
You must purchase a license to use this art.
You may do so HERE


Supplies:
A tube of choice & Font of choice.
I used ChampionScriptPro a PTU Font
Mask of choice. I used a round one.

Awesome Freebie Kit
"O Holy Night"
From: CuddleBeez Scraps
HERE
Thank You So Much!


OK.
This will be quick & easy.

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all.
Resize a paper from the kit and paste into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Resize and add the music notes paper as
a new layer. Rotate it a little. Dropshadow.
Now resize and add the frame.
Next resize the mat from the kit and
add it as a new layer under the frame.
Dropshadow frame.
Now simply resize and add the elements.
All as new layers.
Place them to your liking.
Dropshadow as you go.
Add your tube of choice and dropshadow.
Cut off any bits hanging over.
That's It! You are done!
See mine above or make it your own!
As always mine is just a guide.
Add your Artist © and your Name and
WooT!! You Are Done!
Hint: X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 11, 2009
Any resemblance to another tutorial is purely coincidental.

Dec 9, 2009

♥Dreamy Winter♥


Hello Again Friends!♥
I'm Back with another easy peasy tut!
I was messing around with a QP
and thought I would share.♥
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way! :)
Enjoy!
Have A Blessed Day!

Calling All Taggers!♥
I Opened
A Brand New PSP Forum!
I am Extending out an Invitation to all
of you Active PSPers to come join me!
A place to kick back, relax PSP,and
of course show off your creations!
We have tons of tuts and challenges!
Tube & Tag Prizes!
Make some new friends! It will be fun! :)

Here is the link!
HERE
Hope to see you there!
Welcome to all the ones who have joined!:)
Please do not join if you don't plan to participate.
FYI: For the ones who joined and do not
Show or participate within 3 days will be removed.


Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Elias Chatzoudis.
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
A tube of choice & Font of choice.
I usedBickhamScriptFancy2
Nice Squareish Mask of choice.
Sorry I don't know where I got mine.

Awesome Freebie QP
"Dreamy Winter"
From: Redjuscrap Designs
HERE
Thank You!


Easy Peasy!

Open your QP in PSP.
Resize it 20% Smartsize.
Open a new canvas 600x600,
You may resize/crop later.
Floodfill white.
Paste the QP as a new layer on your canvas.
It will cover the whole canvas.
Apply a mask to the QP, and on your
layers pallette merge mask group.
Next using a closeup tube paste it as a new layer.
Drag it under the QP Masked layer.
Center it in the circle, erase any bits needed & lower the
opacity in your layers pallette. Now simply add
another tube on top of the QP layer.
Place it where it looks best and dropshadow.
Add your Artist © and your Name and
Walla! U R Done! :)
See mine above or make it your own!
As always mine is just a guide.
X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 9,, 2009
Any resemblance to another tutorial is purely coincidental.

♥Waiting For Santa♥



Hello Again Friends!♥
I'm Back again with another tut!
Thanks to those few who do leave a shoutout!♥
Calling All Taggers!♥
I Opened
A Brand New PSP Forum away from YUKU.
I am Extending out an Invitation to all
of you Active PSPers to come join me!
A place to kick back, relax PSP,and
of course show off your creations!
We will have tons of tuts and challenges!
Make some new friends! It will be fun! :)

Here is the link!
HERE
Hope to see you there!
Welcome to all the ones who have joined!:)
Please do not join if you don't plan to participate.
FYI: For the ones who joined and do not
Show or participate within 3 days will be removed.

Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way! :)
Enjoy!
Have A Blessed Day!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Keith Garvey
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
A closeup tube of choice & Font of choice.
I used Will & Grace
Mask of choice.
I used one with stars.

And the Amazing Cluster Frame
From: Rasberry Road Designs
HERE
Thank you!


OK..This will be easy!


Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add another new raster layer.
Selections, select all.
Floodfill with a color from your tube or the frame.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Next resize and add the frame.
Carefully using your freehand selection tool,
Trace around the opening of the frame.
Add another raster layer and floodfill
with another color from the frame or tube.
Select none and drag this layer under the frame.
Add your tube of choice as a new layer.
Place her where she looks best. Drag her under the frame.
Earse any bits needed. Dropshadow tube..
That's It!
See mine above or make it your own!
As always mine is just a guide.
X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 9,, 2009
Any resemblance to another tutorial is purely coincidental.

Dec 8, 2009

♥Christmas Fantasyland♥


Hello Again Friends!♥
I'm Back with another tut!
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way! :)
Enjoy!
Have A Blessed Day!

Calling All Taggers!♥
I Opened
A Brand New PSP Forum away from YUKU.
I am Extending out an Invitation to all
of you Active PSPers to come join me!
A place to kick back, relax PSP,and
of course show off your creations!
We have tons of tuts and challenges!
Tube & Tag Prizes!
Make some new friends! It will be fun! :)

Here is the link!
HERE
Hope to see you there!
Welcome to all the ones who have joined!:)
Please do not join if you don't plan to participate.
FYI: For the ones who joined and do not
Show or participate within 3 days will be removed.


Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Elias Chatzoudis.
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
A tube of choice & Font of choice.
I used Will & Grace
Mask of choice.

Awesome Freebie Kit
"Just Merry Christmas"
From: ET Designs
Scroll down a little.
HERE
Thank You!


OK..Let's Go!

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all.
Resize a paper from the kit and paste into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Next resize and add the red glitter snow.
Now resize and add the frame.
Now simply resize the remaining elements
and place around your frame as above.
the green stars at the top, red ones at the bottom.
The bow and a stocking to the right.
I rotated and colorized my bow to match.
And tree/twig and a stocking to the left.
Add the leaves at the bottom.
Get everything in place how you like and
Simply add your tube and dropshadow!
Woohoo! That's It! :)
Add your Artist © and your Name and
WooT!! You Are Done!
See mine above or make it your own!
As always mine is just a guide.

X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.

Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 8, 2009
Any resemblance to another tutorial is purely coincidental.

Dec 7, 2009

♥Cream Puff Christmas♥


Hello Again Friends!♥
I'm Finally Back with another tut!
Stay tuned for a few more new ones :)
I Spent the weekend decorating the
new forum for Christmas!
It looks awesome! :p
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way! :)
Enjoy!
Have A Blessed Day!

Calling All Taggers!♥
I Opened
A Brand New PSP Forum away from YUKU.
I am Extending out an Invitation to all
of you Active PSPers to come join me!
A place to kick back, relax PSP,and
of course show off your creations!
We have tons of tuts and challenges!
Tube & Tag prizes!
Make some new friends! It will be fun! :)

Here is the link!
HERE
Hope to see you there!
Welcome to all the ones who have joined!:)
Please do not join if you don't plan to participate.
FYI: For the ones who joined and do not
Show or participate within 3 days will be removed.


Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Keith Garvey.
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
A tube of choice & Font of choice.
I used Will & Grace.
Mask of choice.

From A Holiday Train
From: The Saphiras Scrapdesign
HERE
Thank You!


OK..Ready?

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all.
Resize a paper from the kit and paste into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Now resize and add the frame.
Grab your magic wand, click inside frame.
Selections>modify>expand3. Next resize a paper
from the kit and add it as a new layer.
Selections>invert>delete.
Drag paper layer under frame.
Dropshadow frame.
Resize and add the trees inside your frame.
Dropshadow all as you go.
Resize and add the ribbon at the top.
Erase any bits needed.
Now resize the rest of the elements and place to
your liking all around the the frame.
Next add your tube of choice just under a few of the flowers.
Dropshadow tube and erase any parts needed.
Resize and add the wordart.
I added some gradient glow to make it stand out.
Woo-Hoo! :)
Add your Artist © and your Name and
WooT!! You Are Done!
See mine above or make it your own!
As always mine is just a guide.

X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.

Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 7, 2009
Any resemblance to another tutorial is purely coincidental.

Dec 4, 2009

♥Me Time♥


Hello Again Friends!
T.G.I.F.
I'm Back again with another tut!
Was playing around and thought I would share♥
Many possibilities with this one! :)
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way! :)
Enjoy!
Have A Blessed Day!

Calling All Taggers!♥
I Opened
A Brand New PSP Forum.
I am Extending out an Invitation to all
of you Active PSPers to come join me!
A place to kick back, relax PSP,and
of course show off your creations!
We will have tons of tuts and challenges!
Make some new friends! It will be fun! :)

Please do not join if you don't plan to participate. :)
Here is the link!
HERE
Hope to see you there!
Welcome to all the ones who have joined!:)
FYI: For the ones who joined and do not
Show or participate within 3 days will be removed.

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Olivia.
You must purchase a license to use this art.
You may do so at CILM
HERE

Supplies:
A tube of choice & Font of choice.
I used Al Charisma
Fancy Mask of choice.
A few flowers of choice to match.

Awesome Freebie
Christmas Clocks
From: Cajoline Scrap
HERE
Thank You!


OK..Ready?
This will be super Easy!

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all.
Resize a paper from the kit and paste into selection.
Select none. Apply a fancy mask, and on your
layers pallette merge mask group.
Now resize and add one of the clocks.
Keep it big.
Paste your tube of choice as a new layer.
Carefully erase any bits needed.
Dropshadow tube.
Woo-Hoo! Told ya it was easy! :)
Add your Artist © and your Name and
WooT!! You Are Done!
See mine above or make it your own!
As always mine is just a guide.

X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.

Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 4, 2009
Any resemblance to another tutorial is purely coincidental.

♥Trim This♥



Hello Again Friends!
T.G.I.F.
I'm Finally Back again with another tut!
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way! :)
Enjoy!
Have A Blessed Day!

Calling All Taggers!♥
I Opened
A Brand New PSP Forum.
I am Extending out an Invitation to all
of you Active PSPers to come join me!
A place to kick back, relax PSP,and
of course show off your creations!
We will have tons of tuts and challenges!
Make some new friends! It will be fun! :)

Please do not join if you don't plan to participate. :)
Here is the link!
HERE
Hope to see you there!
Welcome to all the ones who have joined!:)
FYI: For the ones who joined and do not
Show or participate within 3 days will be removed.

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Ismael Rac
You must purchase a license to use this art.
You may do so at AMI
HERE

Supplies:
3 tubes of choice & Font of choice.
I used I used PopStar Autograph
1 Mask of choice.
Sorry, don't know where I got mine.

Awesome Freebie Kit
By Kim Cameron Designs
HERE
Thank You Again sweetie!


OK..Ready?
This will be easy.
It looks like a lot of work, but it's not. :)

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all.
Resize a paper from the kit and paste into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Now resize and add the frame.
Grab your magic wand, click inside frame.
Selections>modify>expand3. Next resize a paper
from the kit and add it as a new layer.
Selections>invert>delete.
Drag paper layer under frame.
Dropshadow frame.
Add your closeup tube of choice inside the frame.
Erase any bits needed. Lower the opacity. Dropshadow.
Resize and add the bow, and the flowers
all as new layers around the bottom of the frame.
Arrange to your liking.
Dropshadow all as you go.
Add another tube of choice as a new layer.
Place her where she looks best. Drag her under the frame.
Duplicate the tube and bring the copy to the top layer.
Earse any bits needed. Dropshadow bottom layer tube..
Place a stand up tube to the side if you want.
That's It! You are done!
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely.
Add your Artist © and your Name and
WooT!! You Are Done!

X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches~December 4, 2009
Any resemblance to another tutorial is purely coincidental.

Dec 3, 2009

♥Homespun Christmas♥


Hello Again Friends!♥
I'm Back with another tut!
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way! :)
Enjoy!
Have A Blessed Day!

Calling All Taggers!♥
I Opened
A Brand New PSP Forum away from YUKU.
I am Extending out an Invitation to all
of you Active PSPers to come join me!
A place to kick back, relax PSP,and
of course show off your creations!
We have tons of tuts and challenges!
Tube prizes!
Make some new friends! It will be fun! :)

Here is the link!
HERE
Hope to see you there!
Welcome to all the ones who have joined!:)
Please do not join if you don't plan to participate.
FYI: For the ones who joined and do not
Show or participate within 3 days will be removed.


Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Keith Garvey.
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
A tube of choice & Font of choice.
I used 2Pees Mr Giggles.
Mask of choice. I used a round one.

Awesome Freebie Mini Kit
"Homespun Christmas"
From: The Scrapy Kat
HERE
Thank You!


OK..Ready?

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all.
Resize a paper from the kit and paste into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Resize and add the frame.
Grab your magic wand and click inside the frame.
Selections>modify>expand 4
Resize and paste another paper
from the kit as a new layer.
Selections>invert>delete.
Drag paper under frame and dropshadow frame.
Next simply resize and add the elements
of choice all around your frame.
Play around with it.
Dropshadow all as you go along.
Use your deformation tool to rotate if needed.
Now add your tube of choice,
Place her where she looks best and
drag below the frame layer.
Duplicate the tube abd bring the copy to the top.
Erase any bits needed, and dropshadow bottom tube.
Add your Artist © and your Name and
WooT!! You Are Done!
See mine above or make it your own!
As always mine is just a guide.

X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.

Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 3, 2009
Any resemblance to another tutorial is purely coincidental.

♥In The Meadow♥


Hello Again Friends!♥
I'm Back with another tut!
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way! :)
Enjoy!
Have A Blessed Day!

Calling All Taggers!♥
I Opened
A Brand New PSP Forum away from YUKU.
I am Extending out an Invitation to all
of you Active PSPers to come join me!
A place to kick back, relax PSP,and
of course show off your creations!
We have tons of tuts and challenges!
Tube prizes!
Make some new friends! It will be fun! :)

Here is the link!
HERE
Hope to see you there!
Welcome to all the ones who have joined!:)
Please do not join if you don't plan to participate.
FYI: For the ones who joined and do not
Show or participate within 3 days will be removed.


Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Keith Garvey.
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
A tube of choice & Font of choice.
I used 2Pees My Favorite Things
Mask of choice or the one I used,
From Monti's Pixel Playground
Monti's Blinds Mask 1
HERE
Thank You Monti

Awesome Freebie Kit
"Ginger Snap"
From: Art and Scraps
HERE
Thank You!


OK..Let's go!

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all.
Resize a paper from the kit and paste into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Resize and add the frame.
Grab your magic wand and click inside the frame.
Selections>modify>expand 3
Resize and paste another paper
from the kit as a new layer.
Selections>invert>delete.
Drag paper under frame and dropshadow frame.
Next simply resize and add the elements
of choice all around your frame.
Dropshadow all as you go along.
Use your deformation tool to rotate if needed.
Now add your tube of choice,
Place her where she looks best and
drag below the frame layer.
Duplicate the tube abd bring the copy to the top.
Erase any bits needed, and dropshadow bottom tube.
Add your Artist © and your Name and
WooT!! You Are Done!
See mine above or make it your own!
As always mine is just a guide.

X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.

Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 3, 2009
Any resemblance to another tutorial is purely coincidental.

Dec 2, 2009

♥Chocolicious♥


Hello Again Friends!♥
I'm Back with another tut!
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way! :)
Enjoy!
Have A Blessed Day!

Calling All Taggers!♥
I Opened
A Brand New PSP Forum away from YUKU.
I am Extending out an Invitation to all
of you Active PSPers to come join me!
A place to kick back, relax PSP,and
of course show off your creations!
We have tons of tuts and challenges!
Tube prizes!
Make some new friends! It will be fun! :)

Here is the link!
HERE
Hope to see you there!
Welcome to all the ones who have joined!:)
Please do not join if you don't plan to participate.
FYI: For the ones who joined and do not
Show or participate within 3 days will be removed.


Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Elias Chatzoudis.
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
A tube of choice & Font of choice.
I used PopStar Autograph
Mask of choice.

Awesome Freebie Kit
"Chocolate Comfort"
From: Pixelily's Scrap Designs
HERE
Thank You!


OK..Ready?

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all.
Resize a paper from the kit and paste into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Now resize and add the glitter element 8.
Dropshadow.
Resize and add the heart. Dropshadow.
Now using a closeup tube. Paste as a new layer
above the heart. Lower the opacity in your layers pallette.
Erase any bits hanging over if needed.
Resize and add the wordart as a new layer.
I added some white gradient glow. Dropshadow.
Resize and add the buttons, staples, bows and ribbons.
All as new layers and place them to your liking.
Use your deformation tool to rotate.
Dropshadow all as you go along.
Add your main tube as a new layer
and place her where she looks best.
Dropshadow.
Add your Artist © and your Name and
WooT!! You Are Done!
See mine above or make it your own!
As always mine is just a guide.

X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.

Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 2, 2009
Any resemblance to another tutorial is purely coincidental.

Dec 1, 2009

♥My Gift♥


Hello Friends!♥
I'm Back with another tut!
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way! :)
Enjoy!

Calling All Taggers!♥
I Opened
A Brand New PSP Forum away from YUKU.
I am Extending out an Invitation to all
of you Active PSPers to come join me!
A place to kick back, relax PSP,and
of course show off your creations!
We will have tons of tuts and challenges!
Tube prizes!
Make some new friends! It will be fun! :)

Here is the link!
HERE
Hope to see you there!
Welcome to all the ones who have joined!:)
Please do not join if you don't plan to participate.
FYI: For the ones who joined and do not
Show or participate within 3 days will be removed.


Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Keith Garvey.
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
A tube of choice & Font of choice.
I used Bickham Script Fancy 2
Mask of choice.

Awesome Freebie Kit
"Blog Hop Freebie"
From: MistyBelle Designs
HERE

Thank You!


OK.This will be quick & easy.

Open your supplies in PSP. Open a new
canvas 600x600, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all.
Resize a paper from the kit and paste into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Now resize and add the frame.
Grab your freehand selection tool.
Carefully Trace around frame. Next resize a paper
from the kit and add it as a new layer.
Selections>invert>delete.
Drag paper layer under frame.
Dropshadow frame.
Add your closeup tube of choice inside the frame.
Erase any bits needed. Dropshadow.
Resize and add the bows & tree,
as new layers around the frame.
Arrange to your liking.
Dropshadow all as you go.
That's It! You are done!
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely.
X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches-December 1, 2009
Any resemblance to another tutorial is purely coincidental.
Related Posts with Thumbnails