Jul 30, 2009

♥Oopsie Daisy♥



Hello Again Peeps!
I'm Back again with another tut! :)
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!


Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Elias Chatzoudis
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
1 tube of choice & Font of choice.
I used Wallow HMK
Mask of choice or the one I used,
From Monti's Pixel Playground
Monti's Blinds Mask 1
HERE
Thank you Monti!

Awesome Freebie Kit Called
Oopsie Dasies From:
Bon Scrapatit
HERE
Thank You!


Ya Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Resize and add the jewel sparkles.
Resize and add the plaid frame.
Grap your magic wand and click inside frame.
Selections>modify>expand 10.
Paste another paper of choice as a new layer.
Selections>invert>delete.
Select none.
Drag paper layer under frame.
Dropshadow frame.
Resize the tied wreath frame
and paste as a new layer.
Grab your freehand selection tool
and carefully trace around the frame.
Resize and paste another paper
of choice as a new layer.
Selections>invert>delete.
Select none.
Drag paper layer under frame.
Dropshadow frame.
Now the fun part as always! :)
Resize & add some flowers, buttons,
bows, and any other elements
of choice all around the sides
and bottom of the frame.
Dropshadow everything as you go along.
Use your deformation tool to rotate of needed.
Have fun with it! :)
Click back on your round frame
layer and add your tube of choice.
Dropshadow.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 30, 2009
Any resemblance to another tutorial is purely coincidental.

♥Zebralicious♥



Hello Again Peeps!
Back with another tut for you all.
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Jennifer Janesko
You must purchase a license to use this art.
You may do so at CILM
HERE


Supplies:
1 tube of choice & Font of choice.
I used P22 Bramble Wild
Mask of choice or the one I used,
From Monti's Pixel Playground
Monti's Blinds Mask 1
HERE
Thank you Monti!

Awesome Freebie Kit
From: Simply Sensational Scraps
Called Silver Shadow
HERE
Thank You Monica!


Ok Ya Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Add a glitter doodle on each side.
Grab a round frame and paste as a new layer.
Grab your freehand selection tool
and carefully trace around the frame.
Resize and paste another paper
of choice as a new layer.
Selections>invert>delete.
Select none.
Now the fun part as always! :)
Simply add some flowers and any other elements
of choice all around the sides and bottom of the frame.
Dropshadow everything as you go along.
Use your deformation tool to rotate of needed.
Add your tube of choice and
place her where she looks best.
Dropshadow.
Have fun with it! :)
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 30, 2009
Any resemblance to another tutorial is purely coincidental.

Jul 29, 2009

♥Sweet As Candy♥



Hello Peeps!
I'm Back again with another tut! :)
By Special Request! lol
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!


Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Jose A Cano
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
1 tube of choice & Font of choice.
I used 2Peas Loose Kurls
Mask of choice or the one I used,
Weescotslass mask 153
Found at her blog.
HERE
Ty Again Hunny!

Awesome Freebie Kit Called
Confectioners Sugar From:
Cupcake Sprinkles
HERE
Thank You Again Caitlin!


Ok Let's Do It!

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Resize and minimize in PSP
3 different papers from the kit.
Now, using your Elipse tool set width to 11.
In your materials pallette, set your forground to white..
And background pattern to one of the papers.
Angle 0 Scale 100
One at a time...Changing the paper for each circle,
Hold down the shift key and draw out 3 different size circles.
Dropshadow them as you go.
Arrange to your liking.
Now simply resize the bow, add it to the top left.
Resize and add some other elements of choice all around.
Use your deformation tool to rotate if needed.
Add your tube of choice and dropshadow.
Have fun with it! :)
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 29, 2009
Any resemblance to another tutorial is purely coincidental.

♥Hot-N-Spicy♥


Hello Again Peeps!
HaPpY HumP DaY!
Here is another tut for you all.
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Barbara Jensen.
You must purchase a license to use this art.
You may do so
HERE

Supplies:
1 tube of choice & Font of choice.
I used Ojaio Light
Mask of choice.

Awesome Freebie Kit
Manic Monday Freebie
From JT's Designs
HERE
Thank You Jane!


Ok This will be easy!

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Resize and add the round frame.
Grap your magic wand and click inside frame.
Selections>modify>expand 10.
Paste another paper of choice as a new layer.
Selections>invert>delete.
Select none.
Drag paper layer under frame.
Dropshadow frame.
Resize and add one of the starbursts.
Drag it under your frame layer & dropshadow.
Move it to the left side and duplicate>image>mirror.
Now resize and add one of the flower strings.
Dropshadow and move it to the right side.
Duplicate>Image>mirror.
Next, resize and add some flowers
to the bottom of the frame.
Dropshadow as you go..
Resize and add the stars towards
the top if you like. I erased some parts to make
it look like they are going through the string.
Now click on your frame layer &
Add your tube of choice and dropshadow.
Erase any parts needed haning out at the bottom.
Have fun with it! :)
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 29, 2009
Any resemblance to another tutorial is purely coincidental.

Jul 28, 2009

♥Soft-N-Sexy♥


Hello Again Peeps!
Here is another tut for you all.
I am on my way to 400! LOL
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
I LOVE Reading your comments! :)
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Ismael Rac
You must purchase a license to use this art.
You may do so at AMI
HERE
MPT No longer sells RAC tubes.

Supplies:
1 tube of choice & Font of choice.
I used WallowHmk
Mask of choice.
I used a heart shaped one.
Sorry I don't know where it came from.

Awesome Freebie AddOn Kit Called
Mother's Love
From: Petitmoineaux
Scroll down a little..
HERE
Thank You Stephanie!


Ok..Let's Do It!

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
Resize and add one of the doodles..
Duplicate and image>flip.
Arrange to your liking.
Resize and add the wooden window.
Dropshadow as you go.
Next resize and add the hearts1.
Duplicate and image>mirror.
Resize and add the round string frame.
Grab your freehand selection tool.
Carfully trace around the frame.
Paste another paper of choice as a new layer.
Selections>invert>delete.
Select none.
Drag paper layer under frame.
Dropshadow frame.
Resize and add the hearts 3 as a new layer.
Move it to the right.
Now simply resize the flowers18 and add as a new layer.
Use your deformation tool to rotate.
Place to the bottom right.
Resize and add element 16 and move it to the left.
Resize and add element 17.
I colorized mine to match.
Next, resize and add the plaid heart.
Rotate a little to the left.
Add the bow & dropshadow as you go.
Resize and add the ladybug.
Have fun with it! :)
Now add your tube.
Place her where she looks best and dropshadow.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 28, 2009
Any resemblance to another tutorial is purely coincidental.

♥Ginger Snap♥



Hello Again Peeps!
Here is another tut for you all.
Hope you like it!♥
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Ismael Rac
You must purchase a license to use this art.
You may do so at AMI
HERE
MPT Does not sell his tubes anymore.

Supplies:

Supplies:
1 tube of choice & Font of choice.
I used 2Peas Crumbly Gingersnap
Mask of choice.

Awesome Freebie AddOn Kit Called
A Summer In The Countryside
From Fanette Designs
Scroll down a little..
HERE
Thank You Fanette!


Ok Ya Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group.
I duplicated mine to make it darker.
Resize and add the element 13.
Duplicate and image>flip.
Arrange to your liking.
Find the round white frame 9.
Resize and paste as a new layer.
Grap your magic wand and click inside frame.
Selections>modify>expand 10.
Paste another paper of choice as a new layer.
Selections>invert>delete.
Select none.
Drag paper layer under frame.
Dropshadow frame.
Now Resize and add the frame11
Paste another paper of choice as a new layer.
Selections>invert>delete.
Select none.
Drag paper layer under frame.
Dropshadow frame.
Ok, ya with me so far?
Now...The fun part! :)
Resize and add the leaves,
flowers and ribbons, and any other elements you like.
Place them all as new layers and dropshadow as you go.
Use your deformation tool to rotate if needed.
Play around to see what looks best.
Add your tube of choice & Dropshadow.
Have fun with it! :)
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 28, 2009
Any resemblance to another tutorial is purely coincidental.

Jul 27, 2009

♥Sexy Picnic♥

Hello Again Peeps!
Back with another tut for you all.
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!
Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Dominic Marco
You must purchase a license to use this art.
You may do so at CILM
Supplies:
1 tube of choice & Font of choice.
I used P22 OhLey
Mask of choice
Awesome Freebie Kit From:
Joni Gray
Called Picnic
Thank You! ♥
Ok Ya Ready?
Open your supplies in PSP.
Open a new canvas 700x700,
you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper from the
kit into selection. Select none. Apply a mask, and
on your layers pallette merge mask group.
Resize and add the grass. Move it towards the
bottom.Now resize & add frame as a new layer.
Grab your magic wand. Click inside the frame.
Selections>modify>expand 10Resize and paste
another paper of choice as a new layer.
Selections>invert>delete. Select none.
Drag that layer under your frame. Dropshadow frame.
Resize and add the hedges and the tree.add as
new layers inside the frame.Resize and
add the picnic blanket.Dropshadow as you
go along.Resize and add some of the vines
and flowersplacing them on both sides to your
liking.Resize the grass blades and add at the bottom.
Now simply resize the flip flops and picnic
basket.Add them as new layers, one on each corner.
Add the ants if you wish...ewhhhh. lolAdd your
tube of choice, Dropshadow..and place all layers
where they look best. Have fun with it! :)
See mine above or make it your own!
As always mine is just a guide.
Now X out the bottom layer and your mask layers.
Merge visable the remaining layers. Un X the
hidden layers. Position all layers nicely. Image
Resize 80-90% Bicubic resample all layers checked.
Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Add your Artist © and your Name and WooT!!
You Are Done! Hope you enjoyed my tutorial &
thanks for trying it! Until next time! ♥
Written by Beaches July 27, 2009
Any resemblance to another tutorial is purely coincidental

Jul 26, 2009

♥It's My Party♥...♥Tut #300♥



Hello Peeps!
Hope you all had A Blessed Sunday!♥
I'm Back again with another tut! :)
WOO-Hoo!
TUT # 300!
It's My Party! :)
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
And it keeps me going!
Enjoy!


Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Elias Chatzoudis
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
1 tube of choice & Font of choice.
I used P22 Eaglefeather
Supplies:
Mask of choice or the one I used,
Weescotslass mask 208
Found at her blog.
HERE
Ty Again Hunny!

Awesome Freebie Kit Called
BarLaitier From:
Bric N Brac
HERE
Thank You Luna Bela!


Ok Let's Do It!
This will be easy!

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply the mask, and on your
layers pallette merge mask group.
Resize and add one of the swirls.
Now resize & add frame as a new layer.
Grab your magic wand.
Hold down the shift key &
Click inside both areas of the frame.
Resize and paste another
paper of choice as a new layer.
Selections>invert>delete.
Select none.
Drag that layer under your frame.
Dropshadow frame.
On your layers pallette, merge down.
Now simply resize some flowers
and place to your liking all around as new layers.
Dropshadow as you go.
Resize the shake and the sun.
Add them as new layers.
Add your tube of choice and dropshadow.
Place it where it looks best.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG.
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 26, 2009
Any resemblance to another tutorial is purely coincidental.

Jul 25, 2009

♥Sassy Hint Of Pink♥




Hello Again Peeps!
Here is another tut for you all.
Woo-Hoo!
1 more tut and I will have 300!
That will be tomorrow! lol
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
I LOVE reading your comments! :)
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Ismael Rac
You must purchase a license to use this art.
You may do so at AMI
HERE

Supplies:
1 tube of choice & Font of choice.
I used P22 Hiromina03 Latin
Mask of choice or the one I used,
From Monti's Pixel Playground
Monti's Blinds Mask 1
HERE

Awesome Freebie Kit Called
Friendship Collection-BiaFran
@ Bel Vidotti Scraps
HERE
Thank You!


Ok Ya Ready?
This is easy peasy!

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply the mask, and on your
layers pallette merge mask group.
Find the round white frame and paste as a new layer.
Grap your magic wand and click inside frame.
Selections>modify>expand 10.
Paste another paper of choice as a new layer.
Selections>invert>delete.
Select none.
Drag paper layer under frame.
Dropshadow frame.
Now simply resize and add some flowers
around your frame to the right side.
Dropshadow as you go.
Add the flower then the tag to the left.
I cut a piece of the black ribbon and added it also.
Grab one of the white doodles and paste as a new layer.
Use your deformation tool to rotate how you like.
Place it just above your mask layer at the bottom.
Resze a few butterflies and place to your liking.
Next add your tube of choice and
place her where she loooks best!
Dropshadow.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 25, 2009
Any resemblance to another tutorial is purely coincidental.

Jul 24, 2009

♥Orange U Sexy♥



Hello Peeps!
T.G.I.F.!!
Here is another tut for you all.
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Ismael Rac
You must purchase a license to use this art.
You may do so at AMI
HERE

Supplies:

Supplies:
1 tube of choice & Font of choice.
I used Allise
Mask of choice or the one I used,
Weescotslass mask 84
Found at her blog.
HERE
TYAgain Hunny!

Awesome Freebie Kit Called
Orange From:
Happy Scrap
HERE
Thank You!


Ok Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply the mask, and on your
layers pallette merge mask group.
Resize the green dots, and paste as a new layer.
Dropshadow, move it to the left.
Duplicate it and Image>mirror.
Now resize & add the round frame as a new layer.
Grab your freehand selection tool
and carefully trace around the frame.
Resize and paste another paper
of choice as a new layer.
Selections>invert>delete.
Select none.
Now the fun part as always!
Simply resize some leaves, flowers, ribbons
and any other elemetnts of choice.
Place them all around your frame.
Dropshadow as you go.
Get creative, have fun with it!
Place where they look good and use your
deformation tool to rotate around if needed.
Next, click on your frame layer and
add your tube of choice. Dropshadow.
Erase any parts hanging over the bottom if needed.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Save as PNG
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 24, 2009
Any resemblance to another tutorial is purely coincidental.

Jul 23, 2009

♥Better With Age♥



Hello Again Peeps!
Here is another tut for you all.
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Barbara Jensen.
You must purchase a license to use this art.
You may do so HERE

Supplies:

Supplies:
1 tube of choice & Font of choice.
I used AL Charisma
Mask of choice or the one I used,
Weescotslass mask 84
Found at her blog.
HERE
TYAgain Hunny!

Awesome Freebie Kit Called
Moms Heritage From:
KatNKDA
HERE
Thank You Again Kat!


Ok Let's Do It!

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply the mask, and on your
layers pallette merge mask group.
Repeat this step using a different color paper.
Image>mirror.
Now resize & add frame as a new layer.
Grab your freehand selection tool
and carefully trace around the frame.
Resize and paste another paper of choice as a new layer.
Selections>invert>delete.
Select none.
Drag that layer under your frame.
Resize the leaves30 and flowers18
and add them as new layers.
Using your deformation tool, rotate to your liking.
Place them at the top left of the frame.
Dropshadow as you go.
Resize and add the beads under the top right corner.
Once again rotate a little.
Now add your tube of choice.
Dropshadow & erase any parts hanging over the bottom.
Resize and add the flower doodle13 at the bottom right.
resize and add the vintage button, place it at the bottom left.
See above.
Now resize and add one of the bow ribbons.
Resize and add the roses as new layers.
Now add the pin. I mirrored mine.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 23, 2009
Any resemblance to another tutorial is purely coincidental.

♥I Believe♥



Hello Peeps!
Back again with a new tut!
Woo-Hoooo!
5 more tuts and I will have 300! :o
Have you done them all Yet? lmao
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!


Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Ismael Rac
You must purchase a license to use this art.
You may do so at AMI
HERE

Supplies:

1 tube of choice & Font of choice.
I used AdiosScriptPro
Supplies:
Mask of choice or the one I used,
Weescotslass mask 218
Found at her blog.
HERE
Ty Again Hunny!

Awesome Freebie Kit
6 of 30. From:
CuddleBeez Scraps
HERE
Thank You Brenda!


Ok You Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
Select all.
Resize and paste a paper of choice into selection.
Select none. Apply the mask, and on your
layers pallette merge mask group.
Resize and paste the frame as a new layer.
Grab your magic wand & click inside frame.
Selections>modify>expand 8.
Resize another paper of choice and paste
as a new layer. Selections>invert>delete.
Drag paper under frame.
I added some effects>texture>weave to this layer.
Settings are 2,10,1 Weave and gap
color white, fill gaps checked.
Dropshadow frame.
Now resize the flowers and leaves adding them
as new layers along the left bottom.
Add the roses to the right side.
( See above for example )
Use your deformation tool to rotate if you want.
Dropshadow as you go..
Next, Click on your frame layer
and add your tube of choice.
Dropshadow.
Place it where it looks best.
Erase any parts needed at the bottom.
Resize and add the Bow & Ribbon.
Paste as new layers.
Resize and add the clip
Erase the brown string ribbon from the
clip and add to the top left corner.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 23, 2009
Any resemblance to another tutorial is purely coincidental.

Jul 22, 2009

♥Summer Flirt♥



Hello Peeps!
Sorry about the HACKER who is redirecting
My Blog to some Chat site.
Grrrrrrrrrrrr People need to get a life!
I think I got the problem fixed for now.
Anywhoooo...
I'm Back again with another tut! :)
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!


Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Jason Patterson
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
1 tube of choice & Font of choice.
I used Adios Script Pro
Supplies:
Mask of choice or the one I used,
Weescotslass mask 208
Found at her blog.
HERE
Ty Again Hunny!

Awesome Freebie Kit Called
Summer Flirt From:
KatNKDA
HERE
Thank You Kat!


Ok Let's Do It!
Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply the mask, and on your
layers pallette merge mask group.
Now resize & add frame as a new layer.
Grab your freehand selection tool
and carefully trace around the frame.
Resize and paste another paper of choice as a new layer.
Selections>invert>delete.
Select none.
Drag that layer under your frame.
Dropshadow frame.
Now resize and add the flower doodles as a new layer.
Use your deformation tool to rotate and place
it how you like inder your frame and paper layer.
Duplicate and mirror.
Do the same with the leaves.
Put one on each side.
Click back on your frame layer.
Resize and add some flowers along the bottom.
Dropshadow all as you go.
Resize and add a few butterflies.
Click on your frame layer
and add your tube of choice.
Dropshadow.
Place it where it looks best.
Resize and add the heart neclace.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 22, 2009
Any resemblance to another tutorial is purely coincidental.

Jul 20, 2009

♥Sweet Harmony♥



Hello Again Peeps!
Here is another tut for you all.
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Barbara Jensen.
You must purchase a license to use this art.
You may do so HERE

Supplies:

Supplies:
1 tube of choice & Font of choice.
I used Calibri, all caps.
Mask of choice or the one I used,
Weescotslass mask 208
Found at her blog.
HERE
TYAgain Hunny!

Another Awesome FTU Scrap Kit
It's Called Harmony
From: Scraping Mar
HERE
Thank You Again Mar!


Let's Do This!

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply the mask, and on your
layers pallette merge mask group.
Now resize and add the metal heart as a new layer.
Dropshadow.
Now add one of the heart frames as a new layer.
Click inside using your magic wand.
Selections>modify>expand 16.
Add a new raster layer and floodfill black.
Select none and drag this layer under the frame.
I added some effects>texture>weave to this layer.
Settings are 2,10,1 Weave and gap
color white, fill gaps checked.
Dropshadow frame.
Now simply resize & add some flowers,
or any other elements of choice as new layers.
Dropshadow as you go.
Use your deformation tool to rotate if needed.
Click on your frame layer
and add your tube of choice.
Dropshadow.
Place it where it looks best.
Erase any parts hanging over the bottom.
resize and add the wordart.
I colorized mine to match. :)
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 20, 2009
Any resemblance to another tutorial is purely coincidental.

♥Fancy Pants♥


Hello Everyone!♥
Just Another Manic Monday!
Here is another tut for you all.

Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Thanks to all who take the time to say Thank You!
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Dominic Marco.
You must purchase a license to use this art.
You may do so at CILM
HERE


Supplies:
1 tube of choice & Font of choice.
I used Fabulous 50's
Supplies:
Mask of choice or the one I used,
Weescotslass mask 208
Found at her blog.
HERE
Ty Again Hunny!

Awesome Freebie Kit Called
Memories From:
Scrapping Mar
HERE
Thank You Mar!

Ok You Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply the mask, and on your
layers pallette merge mask group.
Now resize & add frame 32 as a new layer.
Grab your freehand selection tool
and trace around the frame.
Resize and paste another
paper of choice as a new layer.
Selections>invert>delete.
Select none.
Drag that layer under your frame.
Dropshadow frame.
Resize and add the flowers 25 & paste
inside your frame above the paper layer.
Erase any parts hanging over the bottom and sides.
Now simply resize & add some leaves and flowers along
the bottom, and to the top left corner.
Use your deformation tool to rotate.
Dropshadow as you go along.
Resize and add the bow, dropshadow.
Add your tube of choice and dropshadow.
Place it where it looks best.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.
Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 20, 2009
Any resemblance to another tutorial is purely coincidental.

Jul 19, 2009

♥Dee-Licious♥



Hello Peeps!
Here is another tut for you all.
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Thanks to all who take the time to say Thank You!
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Jennifer Janesko.
You must purchase a license to use this art.
You may do so at CILM
HERE


Supplies:
1 tube of choice & Font of choice.
I used Contemorary
Supplies:
Mask of choice or the one I used,
Weescotslass mask 84
Found at her blog.
HERE
Ty Again Hunny!

Awesome Freebie Kit Called
Blingalicious. From:
Unleashed Scraps
HERE
Thank You!


Ok You Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply the mask, and on your
layers pallette merge mask group.
Now resize and add the doodle 3 as a new layer.
Move it to the top right of your canvas.
Duplicate & Image>mirror>duplicate>
flip>duplicate and mirror again.
You should have 4 of these. Dropshadow as you go.
Now resize and add some flowers all around..
Now resize & add frame 2 as a new layer.
Free rotate to the left 90%
Grab your selection tool set to rectangle
and trace around the frame.
Resize and paste another
paper of choice as a new layer.
Selections>invert>delete.
Select none.
Drag that layer under your frame.
Dropshadow frame.
(I added some gradient glow, or you
could use a heavy white dropshadow.)
Click inside your frame layer
and add your tube of choice.
Dropshadow.
Place it where it looks best. Duplicate the tube
and bring the copy to the top layer.
Erase any parts you wish.
Resize and add a ribbon and dropshadow.
Place to your liking.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 19, 2009
Any resemblance to another tutorial is purely coincidental.

♥Chillaxin'♥

Hello Again Peeps!
Hope you have a Blessed Sunday!
Here is another tut for you all.
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!
Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Barbara Jensen.
You must purchase a license to use this art.
You may do so HERE
Supplies:
1 tube of choice & Font of choice.
I used Contemporary
Mask of choice or the one I used,
Weescotslass mask 208
Found at her blog. HERE
TYAgain Hunny!
Awesome FTU Scrap Kit Addon
It's Called Tooffairy From GSCreations
Scroll down a bit..HERE
Thank You GS!
Let's Do This!
Open your supplies in PSP.
Open a new canvas 700x700,
you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all. Resize & Copy and paste
a paper from the kit into selection. Select none.
Apply the mask, and on your layers pallette merge
mask group. Now resize & add the frame as
a new layer. Grab your freehand selection tool.
Carefully trace around the frame.
Resize and add another paper as a new layer.
Selections>invert>delete. Select none. Drag that
layer under your frame. Dropshadow frame.
Resize & add some of the flowers, the heart and
butterflies all around the frame.
Use your deformation tool to rotate.
Place them to your liking and dropshadow.
Click inside your frame layer and add your tube
of choice. Dropshadow. Place it where it looks best.
Duplicate the tube and bring the copy to
the top layer. Erase any parts you wish.
See mine above or make it your own!
As always mine is just a guide.
Now X out the bottom layer and your mask layers.
Merge visable the remaining layers.
Un X the hidden layers. Position all layers nicely.
Image Resize 80-90% Bicubic resample
all layers checked. Hint: You can X out the bottom
white layer before saving to have a transparent
bkg for forums.. Add your Artist © and your Name
and WooT!! You Are Done! Hope you enjoyed
my tutorial & thanks for trying it! Until next time! ♥
Written by Beaches July 19, 2009
Any resemblance to another tutorial is purely coincidental.

Jul 17, 2009

♥Pink Me Licious♥


Hello Peeps!
Back again with another tut! :)
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!
Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Mark Blanton
You must purchase a license to use this art.
You may do so at MPT HERE
Supplies:
1 tube of choice & Font of choice.
I used The Nauti Gal.
Mask of choice or the one I used,
Weescotslass mask 84
Found at her blog. HERE
Ty Again Hunny! ♥
Awesome Freebie Kit
Called Pink-A-Licious
From: Delicious ScrapsHERE
Thank You! ♥
Ok Let's Do It!
Open your supplies in PSP.
Open a new canvas 700x700,
you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all. Resize & Copy and paste
a paper from the kit into selection. Select none.
Apply the mask, and on your layers pallette
merge mask group. Now add the round frame
as a new layer. Click inside using your magic
wand. Selections>modify>expand 8. Add a new
raster layer and floodfill black. Select none and
drag this layer under the frame. I added some
effects>texture>weave to this layer. Settings
are 2,10,1 Weave and gap color white,
fill gaps checked. Dropshadow frame. Now simply
add some flowers, ribbons, a button and the
string, or any other elements of choice
as new layers.Dropshadow as you go.Use your
deformation tool to rotate if needed.Click on your
frame layer and add your tube of choice.
Dropshadow. Place it where it looks best.
Resize and add a ribbon. Dropshadow.
See mine above or make it your own!
As always mine is just a guide.
Now X out the bottom layer and your mask layers.
Merge visable the remaining layers. Un X the
hidden layers. Position all layers nicely.
Image Resize 80-90% Bicubic resample all
layers checked. Hint: You can X out the bottom
white layer before saving to have a transparent
bkg for forums.. Add your Artist © and your
Name and WooT!! You Are Done! Hope you enjoyed
my tutorial & thanks for trying it! Until next time!
Written by Beaches July 17, 2009
Any resemblance to another tutorial is purely coincidental.

Jul 15, 2009

♥Orange Burst♥



Hello Peeps!
Back again with another tut! :)
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Elias Chatzoudis
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
1 tube of choice & Font of choice.
I used Angelina.
Supplies:
Mask of choice or the one I used,
Weescotslass mask 84
Found at her blog.
HERE
Ty Again Hunny!

Awesome Freebie Kit Called
Purple Rain From:
Scrap Lounge
HERE
Or from Pixelfairy Design
HERE
Thank You Pixelfairy!


Ok Let's Do It!

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply the mask, and on your
layers pallette merge mask group.
Now resize and add the element 14 as a new layer.
I colorized mine, it's up to you.
Now resize and add the element 7.
Move it to the top left of your canvas.
Duplicate>mirror>duplicate>flip>
duplicate and mirror again.
You should have 4 of these.
Dropshadow as you go.
Now add the round frame as a new layer.
Click inside using your magic wand.
Selections>modify>expand 8.
Resize and add another paper as a new layer.
Selections>invert>delete.
Select none.
Drag that layer under your frame.
Dropshadow frame.
Add some of the flowers and leaves
to each side around the bottom.
Place them to your liking and dropshadow.
I also added a few flowers the the top
under my frame and paper layer. :)
Click on your frame layer
and add your tube of choice.
Dropshadow.
Place it where it looks best.
Resize and add a ribbon. Dropshadow.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 15, 2009
Any resemblance to another tutorial is purely coincidental.

♥Sweet Stuff♥



Hello Peeps!
Back again with another tut! :)
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Elias Chatzoudis
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
1 tube of choice & Font of choice.
I used Copperplate Gothic Light.
Supplies:
Mask of choice or the one I used,
Weescotslass mask 84
Found at her blog.
HERE
Ty Again Hunny!

Awesome Freebie Kit Called
Sweet Spring From:
Simply Sensational Scraps
HERE
Thank You Monica!


Ok You Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply the mask, and on your
layers pallette merge mask group.
Now add the round frame as a new layer.
Click inside using your magic wand.
Selections>modify>expand 8.
Resize and add another paper as a new layer.
Selections>invert>delete.
Select none.
Drag that layer under your round frame.
Dropshadow frame.
Now add another round frame as a new layer.
Resize it a little.
Click inside using your magic wand.
Selections>modify>expand 8.
Add a new raster layer and floodfill black.
Select none and drag this layer under the frame.
I added some effects>texture>weave to this layer.
Settings are 2,10,1 Weave and gap
color white, fill gaps checked.
Dropshadow frame.
Add some of the flower doodles
to each side at the bottom.
Add some flowers and the birdhouse.
Place them to your liking and dropshadow as you go.
I added a strang and a bow at the top also.
Resize and add the Sweet wordart at the bottom.
Next simply add your tube of choice and dropshadow.
Place it where it looks best.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 15, 2009
Any resemblance to another tutorial is purely coincidental.

Jul 14, 2009

♥Back Off♥



Hello Again Peeps! :)
Here is another tut for you all.
Remember to leave some LUV
If you are using my tuts.♥
100's of you pass by each day.
A Thank You goes a long way!
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Barbara Jensen.
You must purchase a license to use this art.
You may do so HERE

Supplies:

Supplies:
1 tube of choice & Font of choice.
I used P22 Zanner One
Mask of choice or the one I used,
Weescotslass mask 84
Found at her blog.
HERE
TYAgain Hunny!

Awesome FTU Scrap Kit
It's Called Rainbow Wishes
From Scrapbooking By Jalagg
HERE
Thank You Jalagg!


Let's Do This!

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection.
Select none. Apply the mask, and on your
layers pallette merge mask group.
Now add the round frame as a new layer.
Click inside using your magic wand.
Selections>modify>expand 8.
Resize and add another paper as a new layer.
Selections>invert>delete.
Select none.
Drag that layer under your round frame.
Dropshadow frame.
Ok...now...
The fun begins! :)
Resize some flowers of choice and place
all along the bottom of your frame.
Dropshadow as you go.
Every flower that you add...Duplicate and mirror it.
So they are the same on each side.
I also added a few under the frame
and paper layer at the top.
Have fun with it!
Click on your frame layer
and add your tube of choice.
Dropshadow.
Place it where it looks best.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 14, 2009
Any resemblance to another tutorial is purely coincidental.

♥Dinky♥



Hello Peeps!
Back again with another tut! :)
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!


Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Elias Chatzoudis
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:
1 tube of choice & Font of choice.
I used Sack O Potatoes
Supplies:
Mask of choice or the one I used,
Weescotslass mask 218
Found at her blog.
HERE
Ty Again Hunny!

Awesome Freebie Addon Kit Called
Chloe's Dress. From:
HERE
Thank You!


Ok You Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize and paste a paper of choice into selection.
Select none. Apply the mask, and on your
layers pallette merge mask group.
Add one of the flower petals as a new layer.
Resize and add some of the strings.
One at the top and one at the bottom.
Resize and add the frame.
Grab your freehand selection tool,
and trace around the frame.
Resize and paste another paper of choice as a new layer.
Selections>invert>delete. Drag under frame.
Now simply resize and add some leaves and flowers.
Add any other elements of choice.
I used all the ones that were already shadowed.:)
Add the butterfly.
Click inside your frame layer
and add your tube of choice.
Dropshadow.
Place it where it looks best. Duplicate the tube
and bring the copy to the top layer.
Erase any parts you wish.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 14, 2009
Any resemblance to another tutorial is purely coincidental.

Jul 13, 2009

♥New Moon♥



Hello Peeps!
Here is another tut for you all.
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Al Rio.
You must purchase a license to use this art.
You may do so at CILM
HERE


Supplies:
1 tube of choice & Font of choice.
I used Sack O Potatoes
Supplies:
Mask of choice or the one I used,
Weescotslass mask 218
Found at her blog.
HERE
Ty Again Hunny!

Awesome Freebie Kit Called
Waiting For New Moon. From:
Pixelfairy Designs
HERE
Thank You Pixelfairy!


Ok You Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize and paste a paper of choice into selection.
Select none. Apply the mask, and on your
layers pallette merge mask group.
Resize and add swirl2 as a new layer.
Place it at the bottom left.
Resize and add frame5 as a new layer.
Free rotate to the right 90%.
Resize and paste the frame3 as a new layer.
Free rotate 90% to the right also.
Grab your magic wand & click inside this frame.
Selections>modify>expand 10.
Resize another paper of choice and paste
as a new layer. Selections>invert>delete.
Drag paper under frame.
Dropshadow frame.
Now resize and add the wordart layer.
Dropshadow.
Resize and add some leaves and flowers
to the bottom of your frame.
Dropshadow as you go.
Resize the ribbon element and add it to the top left.
Add the staple to the top right.
Resize and add the bow above all layers.
Click inside your frame layer
and add your tube of choice.
Dropshadow.
Place it where it looks best. Duplicate the tube
and bring the copy to the top layer.
Erase any parts you wish.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 13, 2009
Any resemblance to another tutorial is purely coincidental.

♥Love Love Love♥



Hello Peeps!
Here is another tut for you all.
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Thanks to all who take the time to say Thank You!
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Amy Matthews.
You must purchase a license to use this art.
You may do so at CILM
HERE


Supplies:
1 tube of choice & Font of choice.
I used Sack O Potatoes
Supplies:
Mask of choice or the one I used,
Weescotslass mask 218
Found at her blog.
HERE
Ty Again Hunny!

Awesome Freebie Kit Called
Love Love Love. From:
Newlife's Dreams Designs
HERE
Thank You Peg!


Ok You Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize and paste a paper of choice into selection.
Select none. Apply the mask, and on your
layers pallette merge mask group.
I duplicated and mirrored my mask layer.
Add some of the flower doodles as a new layer.
Duplicate>Mirror and flip them how you like.
Dropshadow.
Resize and paste the frame as a new layer.
Grab your magic wand & click inside frame.
Selections>modify>expand 8.
Resize another paper of choice and paste
as a new layer. Selections>invert>delete.
Drag paper under frame.
Dropshadow frame.
Now the fun part!
Resize and add any of the flowers
& Elements of choice.
Dropshadow as you go.
Carefully erase any bits needed.
Click inside your frame layer
and add your tube of choice.
Dropshadow.
Place it where it looks best. Duplicate the tube
and bring the copy to the top layer.
Erase any parts you wish.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 13, 2009
Any resemblance to another tutorial is purely coincidental.

Jul 9, 2009

♥Summer Day♥



Hello Peeps!
Here is another tut for you all.
Remember to leave some LUV
If you are using my tuts.♥
A Thank You goes a long way!
Thanks to all who do take the time
To say Thank You!
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautiful artwork of Dominic Marco.
You must purchase a license to use this art.
You may do so at CILM
HERE


Supplies:
1 tube of choice & Font of choice.
I used Sun Splash
Supplies:
Mask of choice or the one I used,
From Monti's Pixel Playground
Monti's Blinds Mask
HERE
Ty Hunny!

Awesome Freebie Kit Called
Summer Day. From:
J H Blog
Be sure to get both the papers & elements.
HERE
Thank You Jana!


Ok You Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize and paste a paper of choice into selection.
Select none. Apply the mask, and on your
layers pallette merge mask group.
Add the square doodles as a new layer.
Duplicate>Mirror and flip how you like.
Dropshadow.
Resize and paste the frame as a new layer.
Grab your magic wand & click inside frame.
Selections>modify>expand 5.
Resize another paper of choice and paste
as a new layer. Selections>invert>delete.
Drag paper under frame.
Dropshadow frame.
Now the fun part!
Resize and add the clovers, leaves, berries and any other
flowers of choice all along the bottom of the frame.
Dropshadow as you go.
Resize the wordart/cloud and add if you like.
Add your tube of choice and dropshadow.
See mine above or make it your own!
As always mine is just a guide. Now X out the
bottom layer and your mask layers. Merge visable
the remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90%
Bicubic resample all layers checked.
( If you are using the alphas, Resize tag before adding letters)
I also added some gradient glow to make them pop!
You could aslo use a heavy white dropshadow.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches July 9, 2009
Any resemblance to another tutorial is purely coincidental.
Related Posts with Thumbnails