Apr 28, 2009

♥Lilac Butterfly♥


Hiya Peeps!
Just to let you know..
I will be gone for a week or so.
We are going up north tomorrow to
Our Hometown in Maryland to
Get Married. :)
I will be back with more tuts very soon!
Hope you have a wonderful day!
Here is another tut for you all.
I just love this kit!
Remember to leave some LUV.♥
A Thank You goes a long way!
and Thank YOU To all who do!
Enjoy!
Click tag to get full view.
You must have a working knowledge of PSP.

I am using the beautuful artwork of Elias Chatzoudis.
You must purchase a license to use this art.
You may do so at MPT HERE

Supplies:

1 tube of choice & Font of choice.
I used TheNautiGal
Mask of choice.

Amazing Freebie Called Lilac Dreams.
It Can be found at:
Simply Sensational Scraps: HERE
Thank You Monica♥

OK, Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection. Select none. Apply
a mask, and on your layers pallette merge mask
group. Copy and paste a bling doodle as a new layer,
dropshadow. Move it to the left side at the top.
Duplicate and mirror. Paste a heart frame as a
new layer. Using your magic wand, click inside
the frame. Selections>modify>expand8.
Paste a new paper of choice.
Selections>invert>delete.
Drag paper layer under frame.
Select none. Now simply add some flowers,
butterflies and a bow, pasting them all
as new layers all around your frame. Dropshadow as you go.
Add your tube of choice and dropshadow.
See mine above or make it your own!
As always mine is just a guide. Now X out
the bottom layer and your mask layer. Merge visable
the remaining layers. Un X the hidden layers. Position
all layers nicely. Image Resize 80-90% Bicubic
resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..

Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches April 28, 2009
Any resemblance to another tutorial is purely coincidental.

Apr 26, 2009

♥Diva♥



Hiya Peeps!
Hope you had A Blessed Sunday!
Here is another tut for you all.
This tutorial is dedicated to a
Very Good Member & Friend of Mine Rose.
Hope You Like Rose!
xoxox
Remember to leave some LUV.♥
A Thank You goes a long way!
Enjoy!


Click tag to get full view.

You must have a working knowledge of PSP.

I am using the beautuful artwork of Barbara Jensen.

You must purchase a license to use this art.
You may do so HERE

Supplies:

2 tubes of choice & Font of choice.
I used 2Peas Favorite Things.
Mask of choice.

Another Fabby Freebie Friendship Collection
Ale`Capeleiro
It Can be found at:
Bel Vidotti Scraps: HERE
Thank You Again Bel! ♥



Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection. Select none. Apply
a mask, and on your layers pallette merge mask
group. Resize and paste a doodle as a new layer, dropshadow.
Duplicate and mirror that.
Arrange one on each side.
Now duplicate one of those and rotate it 90. Move it to the top.
Duplicate it again and image>flip. Arrange to your liking.
Now, it gets tricky. lol Grab your elispe tool, set to circle,
width 25, forground black, background nul/none.
Create on vector checked.
Hold down the shift key and draw a circle for your frame.
Convert to raster layer on your layers pallette.
Grab your magic wand and click inside frame.
Selections>modify>expand 8. Paste
a paper of choice as a new layer.

Selections>invert>delete. Drag
paper layer under the frame.

Dropshadow frame.
I added some
effects>texture>weave to this paper layer. Settings
are 2,10,1 Weave and gap color white, fill gaps checked.

Now grab your pen tool. Line style dotted, width 6.
Create on vector checked again.
Hold down the shift key and make a line accross your frame.
Convert to raster layer.
Dropshadow and repeat that step so you have 2 lines.
Resize the leaves/vine and paste
as a new layer inside your frame.
Resize and add some flowers to the vine. Now click on
your paper layer, and paste a tube of choice.
Erase any parts hanging over.
Colorize it to Hue0 Saturation 0.
Click on your black frame layer. Resize and
paste the diamond stud as a new layer.
Dropshadow. Copy it and continue pasiting
them all around your frame. Now paste the
flower leaf as a new layer. Dropshadow.
Add The Words diva-licious if you wish.
See mine as example. Paste another
tube as a new layer and dropshadow.
See mine above or make it your own!
As always mine is just a guide. Now X out
the bottom layer and your mask layer. Merge visable
the remaining layers. Un X the hidden layers. Position
all layers nicely. Image Resize 80-90% Bicubic
resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..

Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches April 26, 2009
Any resemblance to another tutorial is purely coincidental.

Apr 25, 2009

♥In Your Dreams♥


Hiya Peeps!
Hope you are having an awesome weekend!
Here is another tut for you all.
I just love this kit!
Remember to leave some LUV.♥
A Thank You goes a long way!
& A Huge Thank YOU To all who do!
Enjoy!


Click tag to get full view.
You must have a working knowledge of PSP.

I am using the beautuful artwork of Elias Chatzoudis.
You must purchase a license to use this art.
You may do so at MPT HERE

Supplies:

1 tube of choice & Font of choice.
I used TheNautiGal
Mask of choice.

Amazing Freebie Called Lilac Dreams.
It Can be found at:
Simply Sensational Scraps: HERE
Thank You Monica♥

OK, Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection. Select none. Apply
a mask, and on your layers pallette merge mask
group. I colorized this mask layer to Hue0 & Saturation0.
Copy and paste a bling doodle as a new layer,
dropshadow. Move it to the left side at the top.
Duplicate and mirror. Paste a heart frame as a
new layer. Using your magic wand, click inside
the frame. Selections>modify>expand8.
Paste a new paper of choice.
Selections>invert>delete.
Drag paper layer under frame. Add one of the
sparkle rain elements under the frame.
Colorize it to 0,0 also. Dropshadow.
Erase any parts hanging over the sides.
Now simply add some flowers,
butterflies, ribbons and a bow, pasting them all
as new layers all around your frame.
I colorized a few to match. Dropshadow as you go.
Add a rose and rotate to the left 90%.
Make it a little bigger and dropshadow. Place it at
the bottom of your tag, and using your
deformation tool, slant it a little.
Duplicate it and Image>Mirror.

Add your tube of choice and dropshadow.
See mine above or make it your own!
As always mine is just a guide. Now X out
the bottom layer and your mask layer. Merge visable
the remaining layers. Un X the hidden layers. Position
all layers nicely. Image Resize 80-90% Bicubic
resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..

Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches April 25, 2009
Any resemblance to another tutorial is purely coincidental.

Apr 24, 2009

♥Ahoy♥



Hiya Peeps!
T.G.I.F.!
Here is another tut for you all.
Remember to leave some LUV.♥
A Thank You goes a long way!
Enjoy!
Click tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Elias Chatzoudis.
You must purchase a license to use this art.
You may do so at MPT HERE

Supplies:

1 tube of choice & Font of choice.
I used Copperplate Gothic Light.
Mask of choice. I used a round one.

Another Fabby Freebie Called
Friendship Collection

It Can be found at:
Bel Vidotti Scraps: HERE
Thank You Bel! ♥

Easy Peasy Tut, Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection. Select none. Apply
a mask, and on your layers pallette merge mask
group. Resize and paste the palm tree
as a new layer, dropshadow.

Duplicate and mirror that. Move one to
each side. Paste the square frame as a

new layer. Using your magic wand, click inside
the frame. Selections>modify>expand6.
Paste a new paper of choice. I used the seashell one.
Selections>invert>delete. Select none. Drag paper layer under frame.
Now simply resize some elements pasting them all
as new layers all around your frame. Dropshadow as you go.
Click on your frame layer and add your tube of choice. Dropshadow.
See mine above or make it your own!
As always mine is just a guide. Now X out
the bottom layer and your mask layer. Merge visable
the remaining layers. Un X the hidden layers. Position
all layers nicely. Image Resize 80-90% Bicubic
resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..

Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches April 24, 2009
Any resemblance to another tutorial is purely coincidental.

Apr 23, 2009

♥Meli-Melo♥


Hiya Peeps!
Here is a new tut for
you all before I go to work.
Remember to leave some LUV
if you are using my tuts.♥
A Thank You goes a long way!
Enjoy!

Click tag to get full view.

You must have a working knowledge of PSP.

I am using the beautuful artwork of Ismael Rac.

You must purchase a license to use this art.
You may do so at MPT HERE

Supplies:

1 tube of choice & Font of choice.
I used Ribbon.
Mask of choice.

Awesome FTU Scrap Kit
It's called Meli-Melo
From Ninie,
You can find it on her blog:
HERE
Thank You Ninie! ♥

OK, Ya Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection. Select none. Apply
a mask, and on your layers pallette merge mask
group. Resize the square frame and paste it as a
new layer. Using your magic wand, hold down
the shift key and click inside all the areas
of the frame. Selections>modify>expand6.
Resize & Paste a new paper of choice.
Selections>invert>delete. Drag paper layer under frame.
Now click on the frame layer and on your layers pallette,
right click that layer and merge down.
Rotate that layer now, a little to the right.
Resize and paste the heart string frame as a new layer.
Using your magic wand, click inside frame.
Modify>expand6. Add a new raster layer
while still selected. Floodfill that black. Select none.
Drag layer under frame. I added some
effects>texture>weave to this layer. Settings
are 2,10,1 Weave and gap color white, fill gaps checked.
Dropshadow frame. Resize and add some leaves,
flowers, the tag and some buttons as new layers.
Dropshadow those. Resize and add the love srting
and paste as a new layer. Dropshadow. Click inside your frame and
add your tube of choice. Dropshadow. Place it where it looks best.
I placed mine above the leaves and under the flower.
See mine above or make it your own!
As always mine is just a guide. Now X out
the bottom layer and your mask layer. Merge visable
the remaining layers. Un X the hidden layers. Position
all layers nicely. Image Resize 80-90% Bicubic
resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..

Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches April 23, 2009
Any resemblance to another tutorial is purely coincidental.

Apr 22, 2009

♥Golden Goddess♥



Hi Again Peeps!

Here is another new tut for you all.
Remember to leave some LUV
if you are using my tuts.♥
A Thank You goes a long way!
Enjoy!


Click tag to get full view.

You must have a working knowledge of PSP.

I am using the beautiful artwork of Barbara Jensen.

You must purchase a license to use this art.
You may do so HERE

Supplies:

1 tube of choice & Font of choice.
I used Mistral.
2 Masks of choice.
I used a round one and a fancy one.
Sorry I don't know where I got mine.

Awesome FTU Cluster Frame
It's called Tatiana Cluster
From Denz Designz
You can find it on her blog:
HERE
Thank You Denny! ♥


Ok...Ya Ready?
This will be easy!


Open your frame in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer again and floodfill
with a color from the frame. Apply
a mask, and on your layers pallette merge mask
group. Now add another raster layer if you want
and repeat steps above using a different color from
the frame & a different mask. Merge mask group.
Copy and paste the cluster frame as a new layer.
Using your freehand selection tool, trace around the
outter edges of the frame. Leave selected,
& Add another raster layer,

and floodfill that with yet another color,
from your tube or the frame. Select none and
drag that layer under your frame layer.
Dropshadow frame. I added some
effects>texture>weave to this layer. Settings
are 2,10,1 Weave and gap color white, fill gaps
checked. Click inside your frame
and add your tube of choice.

Dropshadow. Place it where it looks best.
Duplicate the tube and bring the copy to the top layer.
Erase any parts you wish. See mine above or make it
your own! As always mine is just a guide. Now X out
the bottom layer and your mask layer. Merge visable
the remaining layers. Un X the hidden layers. Position
all layers nicely. Image Resize 80-90% Bicubic
resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..

Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches April 22, 2009
Any resemblance to another tutorial is purely coincidental.

♥Fun Grunge♥


Hi Again Peeps!
HaPpY HumP DaY!
Here is another new tut for you all.
Remember to leave some LUV
if you are using my tuts.♥
A Thank You goes a long way!
Enjoy!


Click tag to get full view.

You must have a working knowledge of PSP.

I am using the beautiful artwork of Barbara Jensen.

You must purchase a license to use this art.
You may do so HERE

Supplies:

1 tube of choice & Font of choice.
I used The NautiGal.
Mask of choice. I used a round one.

Awesome FTU Scrap Kit
It's called Night Wish
From Mari Liess
You can find it on her blog:
HERE
Thank You Sweetie! ♥


Ok...Ya Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection. Select none. Apply
a mask, and on your layers pallette merge mask
group. Resize the butterfly ans paste as a new layer.
Image>flip. Dropshadow.Resize the jean pocket
and paste as a new layer, dropshadow.
Duplicate the pocket and resize the copy a bit smaller.
Rotate it a little using your deformation tool.
Arrange to your liking.

Now the fun part! Resize and add the sunglasses,
clip, the key, the flowers and the balloon.

Resize a ribbon and some buttons. See above.
Add all these as new layers and dropshadow as you go.

Add your tube of choice. Dropshadow. I used
the sunglasses to cover the bottom of my tube.

Have fun with it, make it your own! As always
mine is just a guide. Now X out

the bottom layer and your mask layer. Merge visable
the remaining layers. Un X the hidden layers. Position
all layers nicely. Image Resize 80-90% Bicubic
resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..

Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches April 22, 2009
Any resemblance to another tutorial is purely coincidental.

Apr 20, 2009

♥Material Girl♥


Hi Again Peeps!
Here is another new tut for you all.
Remember to leave some LUV.♥
A Thank You goes a long way!
Enjoy!


Click tag to get full view.

You must have a working knowledge of PSP.

I am using the beautuful artwork of Barbara Jensen.

You must purchase a license to use this art.
You may do so HERE

Supplies:

1 tube of choice & Font of choice.
I used three Dates One Night.
Mask of choice.

Awesome FTU Mini Scrap Kit
It's called Grandmother's Grace
From A Little Bit Scrappy
You can find it on her blog:
HERE
Thank You Megan! ♥


Easy Peasy..Ya Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection. Select none. Apply
a mask, and on your layers pallette merge mask
group. Resize the mat and paste as a new layer, dropshadow.
Resize the frame and paste it as a
new layer. Using your magic wand, click inside the frame.
Selections>modify>expand 10. Paste another
paper of choice as a new layer and then
selections>invert>delete. Select none.
Drag paper layer under frame. Dropshadow frame. I added some
effects>texture>weave to this paper layer. Settings
are 2,10,1 Weave and gap color white, fill gaps
checked. Now resize the round ribbons, placing
one on each side under the frame, & above the mat.
You will have to mirror one. Place to your liking
and dropshadow. Resize the flowers and buttons,
etc and place as above, or how you like. Dropshadow.
Resize and add the leaf. Dropshadow. I also added
the tag under one of the cloth flowers.Rotate with
your deformation tool. Dropshadow.
Click inside
your frame and add your tube of choice.

Dropshadow. Place it where it looks best.
Duplicate the tube and bring the copy to the top layer.
Erase any parts you wish. See mine above or make it
your own! As always mine is just a guide. Now X out
the bottom layer and your mask layer. Merge visable
the remaining layers. Un X the hidden layers. Position
all layers nicely. Image Resize 80-90% Bicubic
resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..

Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches April 20, 2009
Any resemblance to another tutorial is purely coincidental.

♥Hunky Dory♥



Hiya Again Peeps!
Hope you had a good weekend!
Here is a new tut for you all finally.
Remember to leave some LUV.♥
A Thank You goes a long way!
Enjoy!

Click tag to get full view.
You must have a working knowledge of PSP.

I am using the beautuful artwork of Ismael Rac.

You must purchase a license to use this art.
You may do so at MPT HERE

Supplies:

1 tube of choice & Font of choice.
I used Georgia.
Mask of choice.

Awesome FTU Mini Scrap Kit
It's called Hunky Dory
From The Dickinsons,
You can find it on her blog:
HERE
Thank You Andrea! ♥

OK, Ya Ready?

Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper
from the kit into selection. Select none. Apply
a mask, and on your layers pallette merge mask
group. Resize the frame and paste it as a
new layer. Using your magic wand, click inside the frame.
Selections>modify>expand 10. Paste another
paper of choice as a new layer and then
selections>invert>delete. Select none.
Drag paper layer under frame. Dropshadow frame.
Resize the leaves/stem and add as a new layer.
Move it to the right.
Dropshadow. I cut of the bit hanging over the bottom.
Resize the flower and paste as new
layer at the top right of the frame. Next duplicate
and resize a little smaller. Drag that one under your
leaves/stem. Now resize a few of the the ribbons and
place them at the top left of the frame. Rotate to your liking.
Dropshadow those. Resize the string, and paste as a new
layer at the bottom of your tag. Dropshadow.
Click inside your frame and add your tube of choice.
Dropshadow. Place it where it looks best.
Duplicate the tube and bring the copy to the top layer.
Erase any parts you wish. See mine above or make it
your own! As always mine is just a guide. Now X out
the bottom layer and your mask layer. Merge visable
the remaining layers. Un X the hidden layers. Position
all layers nicely. Image Resize 80-90% Bicubic
resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..

Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!

Written by Beaches April 20, 2009
Any resemblance to another tutorial is purely coincidental.

I'm Back!!


Hello Peeps!
Did ya miss me??? LOL
So sorry I have not been here.
I couldn't get any new tuts made
because my computer crashed last week. :o
I had to do a full sysyem recovery and lost everything!
So glad I had my tubes on disk. Whew!
I got a new copy of PSP, and have been spending
all weekend getting things sorted.
You never know what you have till it's gone.
Back up those files girls! NOW!!
I have seen so many peeps lose it all!
I will be back making all new tuts all
this week inbetween working mad hours!
Hope to get one done today.
Hugz...Beaches

Apr 15, 2009

♥New Award♥


I am so very thrilled!
I have recieved this New Award
from two awesome taggers!
Thank you so very much to
Bright and Mercy !!
It means a lot!
xoxoxo


Apr 12, 2009

♥Daydreams♥


Hiya Peeps!
Hope you had A Blessed Easter!

Here is a new tut for you all.
Remember to leave some LUV.♥
A Thank You goes a long way!
Enjoy!


Click tag to get full view.
You must have a working knowledge of PSP.

I am using the beautuful artwork of Jay Trembly.
You must purchase a license to use this art.
You may do so at CILM
HERE

Supplies:

1 tube of choice & Font of choice.
I used Tahoma. All Caps.
Mask of choice or the one I used,
Weescotslass mask 84 Found
HERE
TY Hunny! ♥


Another Fabby Freebie Called Daydreams
It Can be found at:
Rebecca's Scrapping Silliness: HERE
Thank You Again Rebecca! ♥

Easy Peasy Tut, Ready?

Open your supplies in PSP. Open a new canvas
700x700, you may resize/crop later. Floodfill white.
Add a new raster layer. Selections,select all.
Resize & Copy and paste a paper from the kit
into selection. Select none. Apply the mask,
and on your layers pallette merge maskgroup.
Resize the green frame and paste it as anew layer.
Using your magic wand, click inside the
large area of the frame. Selections>modify>expand 10.
Paste anotherpaper of choice as a new layer and
then selections>invert>delete. Select none.
Drag paper layer under frame. Dropshadow frame.
Resize the leaves and add as a new layer.
Move it to the left. Dropshadow.Resize some flowers
of choice and paste as new layer all around the left
side of the frame. Next add a few to the top right
corner. Resize and paste as a new layer the glitter
ribbon swirls. Now resize the ribbon and place it so
its going accross your tag. I colorized mine green.
Dropshadow. Add a few butterflies. Dropshadow all those.
Resize & Add a few buttons to the bottom right.
Dropshadow. Place all layers where they look best.
Click inside your frame and add your tube of choice.
Dropshadow. Place it where it looks best.Duplicate
the tube and bring the copy to the top layer. Erase
any parts you wish. See mine above or make ityour own!
As always mine is just a guide. Now X outthe bottom
layer and your mask layer. Merge visable the remaining
layers. Un X the hidden layers. Position all layers nicely.
Image Resize 80-90% Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..

Add your Artist © and your Name and WooT!!
You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!♥
Written by Beaches April 12, 2009
Any resemblance to another tutorial is purely coincidental.

Apr 11, 2009

♥Peace & Love♥

Hiya Peeps!
Hope you are having an awesome weekend!

Here is another tut for you all.
I just love this kit!
Remember to leave some LUV.♥
A Thank You goes a long way!
and Thank YOU To all who do!

Enjoy!


Click tag to get full view.
You must have a working knowledge of PSP.

I am using the beautuful artwork of Ismael Jose A. Cano.
You must purchase a license to use this art.
You may do so at MPT
HERE

Supplies:

1 tube of choice & Font of choice.
I used A&S Snapper Script
Mask of choice or the one I used,
Weescotslass mask 84 Found
HERE
TY Hunny! ♥


Amazing Freebie Called Peace & Love.
It Can be found at:
Jaelop Designs:
HERE
Thank You Again Jael Sweetie♥
God Bless You!


OK, Ya Ready?

Open your supplies in PSP. Open a
new canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copyand paste a paper
from the kit into selection.Select none. Apply
the mask, and on your layers pallette merge
mask group. Resize the wooden frame and paste
it as a new layer. Using your selection tool set to
rectangle, trace around the opening of the frame.
Paste another paper of choiceas a new layer and then
selections>invert>delete. Select none. Drag paper
layer under frame. Now click on your masked layer,
resize and add the round red ribbon. Dropshadow. Resize
and add the blue round ribbon, dropshadow.
Image>mirror>flip. resize & Add the round red string
as well. Dropshadow. Place them all to your liking
under there. Now, click on your masked layer again,
and resize the blue hearts. Paste as a new layer.
Dropshadow. Duplicate that and image>mirror. Place
one on each side of the tag. Now Resize and add
some leaves and flowers of choice. Place where
they look best, or see mine above. Resize the button
and place it so it looks like the frame is hanging from
it. Dropshadow. Resize the red heart and place it also
as if it was hanging from the frame. Erace a bit.
Dropshadow. Resize and add a butterfly, or any other
elements of choice and dropshadow. Click inside your
frame and add your tube of choice. Dropshadow.Place
it where it looks best. Duplicate the tubeand bring
the copy to the top layer. Erase any parts you wish.
Resize the wordart and place to your liking. I
rotated each word a bit. Dropshadow those. See mine
above or make it your own! As always mine is
just a guide. Now X out the bottom layer and your
mask layer. Merge visable the remaining layers.
Un X the hidden layers. Position all layers nicely.
Image Resize 80-90% Bicubic resample all layers checked.

Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..

Add your Artist © and your Name and
WooT!!
You Are Done!

Hope you enjoyed my tutorial & thanks for trying it!
Until next time!♥

Written by Beaches April 11, 2009
Any resemblance to another tutorial is purely coincidental.

Apr 8, 2009

♥So Cute♥

HappY HumP DaY!
Thank you for the awesome comments!
Here we go..on my way to another
100 or so tuts..LOL
Remember to leave some LUV ♥
A little Thank You goes a long way.
Enjoy!
Click tag to get full view.
You must have a working knowledge of PSP.

I am using the beautuful artwork of Ismael Rac.
You must purchase a license to use this art.
You may do so at MPT HERE

Supplies:

1 tube of choice & Font of choice.
I used Calvin and Hobbes.
Mask of choice or the one I used,
Weescotslass mask 84 Found HERE
TY Hunny! ♥
Awesome FTU Scrap Kit called
So Cute From ChrisScraps,
You can find it on her blog: HERE
Scroll down a bit.
Thank You Chris! ♥
I got the inspiration for this tut from
a tag made by Jody. TY hunny! ♥
OK, Ya Ready?
Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Resize & Copy and paste a paper from
the kit into selection. (I used a new raster layer
and floodfilled it with a checkered pattern.
You may or may not have this.) Select none.
Apply the mask,and on your layers pallette merge
mask group.Resize element5 and paste as a new
layer, Dropshadow. Duplicate and mirror.Move these
to the top of your tag. Now resize and add
element2 and paste as a new layer.Duplicate that
and image>mirror also. Place at the bottom of
your tag. Resize and add the rainbow. Dropshadow.
Move it to the top. Resize the square doolde
and paste as a new layer. Dropshadow. Now resize
and add the star shaped doodle. Click inside
with your magic wand and selections>modify>expand8.
Paste a paper from the kit as a new layer.
Selections>invert>delete on your keyboard.
Drag that layer under the star doodle. Dropshadow star.
Next resize one of the felt hearts and paste as a
new layer. Move it to the right. Dropshadow. Resize
and add one of the So Cute buttons at the top of the
star. Dropshadow. Resize and paste as a new
layer the black attache clip element. Rotate it to
the left 25%. Place it at the top of the square doodle
on the left side. Use your eraser tool to erase a bit
so it looks like it's hanging. Dropshadow. Image>mirror.
And place it the same way on the other side.
Resize and add a few buttons if you wish. Dropshadow.
This is a cool and funky kit. Have fun with it! Now
simply add your tube of choice as a new layer and
dropshadow. Place it where it looks best. See mine
above or make it your own! As always mine is just
a guide. Now X out the bottom layer and your
mask layer. Merge visable the remaining layers.
Un X the hidden layers. Position all layers nicely.
Image Resize 80-90% Bicubic resample all layers checked.
Hint: You can X out the bottom white layer
before saving to have a transparent bkg for forums..
Add your Artist © and your Name and
WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it!
Until next time!
Written by Beaches April 8, 2009
Any resemblance to another tutorial is purely coincidental.
Related Posts with Thumbnails