Oct 31, 2008

●Happiness Looks Like..●



Click on tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Jennifer Janesko.
You must purchase a license to use her art.
You may do so at CILM.

1 tube of choice & Font of choice.
I used A&S Signwriter for my name,
and 2Peas GGs Love Me, (Letter S for the wordart.)
Mask of choice.
FTU Supplies can be found at
Irene's Scrapbooking Digital Designs,
HERE
Another Awesome FTU kit called Florentine.
Thank you Irene for sharing your wonderful
talent with the psp and scrapping community.
Please when downloading leave a little bit of
love and a thank you, it only takes a sec while
waiting for the upload in 4shared to say thank you!

Another Easy Peasy tut!....Ready, Set, Let's Go!

Open your supplies and minimize for now.
Open a new canvas 700x700, you may resize later.
Floodfill white. Add a new raster layer and
select all. Resize (smartsize) & Paste a paper
of choice into selection. Select none.
I colorized mine to make it brown.
Apply Mask of choice and merge group on mask layer.
Resize and add the frame. Using magic wand,
hold down the shift key and select inside both
frames. Selections>modify>expand 5 and paste
paper of choice as a new layer. Selections invert
delete on your keyboard. Drag paper under
frame layer. Now click in side each frame and
using the same technique, add your tubes of
choice, one frame at a time. dropshadow tubes
and frame. Resize and paste as new layers the
rest of the elements, using your deform tool to
rotate them around. Copy and paste the heart
as a new layer>duplicate and resize it 80%, so
you have 2, one smaller than the other.
Place all to your liking. See mine for example.
Dropshadow those. Arrange all of your layers
to your liking. Now X out the bottom layer and
your mask layer. Merge visable the remaining layers.
Un X the hidden layers.
Position all layers nicely.
Image Resize 80-90% if needed,
Bicubic resample all layers checked.
Add your Artist © and your Name and Wow!!
You Are Done! Enjoy your new tag!

Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 31st. 2008
Any resemblance to another tutorial is purely coincidental.

Oct 30, 2008

●Love Never Melts●



Click on tag to get full view.
I am using the beautuful artwork of Elias Chatzoudis.
You must purchase a license to use this art.
You may do so at MPT
1 tube of choice & Font of choice.
I used P22 OhLey.
Mask of choice or the one I used,(Again) lol
Weescotslass mask 84 Found HERE
TY Hunny!
FTU Supplies can be found at CinnamonScraps
An Awesome FTU kit called Love Never Melts.
Thank you Laura for sharing your wonderful talent
with the psp and scrapping community.
Please when downloading leave a little bit of love
and a thank you, it only takes a sec while
waiting for the upload in 4shared to say thank you!
Easy Peasy Tut...Let's do It!!Open your supplies in PSP.
Open a new canvas 700x700,
You may resize/crop later. Floodfill white.
Add a new raster layer. Selections, select all.
Copy and paste a paper of choice from the kit
into selection, . Select none. Apply the mask,
and on your layers pallette merge mask group.
Add the heart shaped Frame , Using magic wand,
select inside frame. Selections>modify>expand 5.
Paste paper of choice, and selections>invert>delete
on your keyboard. Drag paper layer under the
frame & dropshadow frame. Paste a ribbon of
choice, & dropshadow, erase away sides
hanging over. Resize some flowers, bows,
and butterflies etc, and any other embelishments
you like. There are plenty to work with!
Place to your liking, and dropshadow.
See mine as example, or make it your own. :)
As always mine is just a guide.
Arrange all of your flowers, bow and other
layers to your liking. Now add your tube of choice.
Drag below the frame layer, position it where
it looks best. Dropshadow. Duplicate the tube
and bring the duplicated layer to the top.
Erase any parts hanging over and parts
covering your ribbon. Now X out the bottom layer
and your mask layer. Merge visable the
remaining layers. Un X the hidden layers.
Position all layers nicely.
Image Resize 80-90%
Bicubic resample all layers checked.
Add your Artist © and your Name and WooT!!
You Are Done!
Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 30th. 2008
Any resemblance to another tutorial is purely coincidental.

●Urban Retro●


Click on tag to get full view.
I am using the beautuful artwork of Ismael Rac.
You must purchase a license to use this art,
You may do so at MPT
1 tube of choice & Font of choice,
I used Felix Titling.
PTU Scrap Supplies can be Purchased at Rachels Blog,
Captivated Visions
An Awesome new kit called Urban Retro.
Very Different and Well Worth it!
Thank you Rachel! ♥ A Wonderful kit!
Easy Peasy Tut...Let's do It!!
Open your supplies in PSP.
Open a new canvas 700x700,
You may resize/crop later.
Floodfill white. No mask needed!
Copy and paste Splatter doodle5 as a new layer.
Add Element6 as a new layer and light dropshadow.
Paste Urban building1 as a new layer.
Move it slightly to the right.
Then paste Urban building6 as a new layer,
dropshadow. Paste element5 as a new layer,
dropshadow. Resize element4 and place to
your liking, dropshadow. Resize the flowers,
and music note, add as new layers place where
they look best and light dropshadow.
Paste element19 as a new layer, move to the
bottom of your tag, dropshadow.
Resize buttons of choice and place them to
your liking. Dropshadow. Make it your own. :)
Add your tube of choice, and dropshadow.
Arrange all of your layers to your liking.
Image Resize 80-90% if needed,
Bicubic resample all layers checked.
Add your Artist © and your Name and Walla!!You Are Done!
Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 30th. 2008
Any resemblance to another tutorial is purely coincidental.

Oct 29, 2008

●Ice Queen●


Click on tag to view full image.
I am using the beautiful artwork of Jamie Kidd
You will need a licence to this artwork
which can be obtained from CILM
1 or 2 tubes of choice & Font of choice.
I used WaterBrushROB, a pay font.
Mask of choice or the one I used,
Weescotslass mask 84 FoundHERE
TY Sweetie!
FTU Supplies can be found at
SimplySensationalScraps, HERE
An Awesome FTU kit called Winter Wonderland.
Thank you Monica for sharing your wonderful talent
with the psp and scrapping community. Mwahh!
Please when downloading leave a little bit of love
and a thank you, it only takes a sec while
waiting for the upload in 4shared to say thank you!
Easy Peasy Tut...Let's Goooo!
Open your supplies in PSP.
Open a new canvas 700x700, you may
resize/crop later. Floodfill white. Add a new
raster layer. Selections, select all. Copy and
paste a paper of choice from the kit into selection.
Select none. Apply a mask, and on your
layers pallette merge mask group. Add the big
round frame2 , Using magic wand, select inside
frame. Selections>modify>expand 8.
Paste paper of choice > selections>invert>delete
on your keyboard. Drag paper layer under the
frame & dropshadow frame. Add the next frame6
over those layers. While holding down the
shift key, using your magic wand,
select inside all open areas of the frame,
Selections>modify>expand>6. Paste another paper
of choice using the same method above.
Now add your tubes of choice. Drag below the
frame layer, position them where they look best.
One in each frame. Erase any parts hanging out of
the frame. Dropshadow. Add some glitter doodles
under the frames and above the mask layer.
resize some snowflakes and place all around your
tag, see mine above. Light dropshadow.
Resize some flowers, bows and baubles,
or any other elements of choice & place to your
liking as new layers, dropshadow. Arrange all of
your layers to your liking. Now X out the
bottom layer and your mask layer.
Merge visable the remaining layers.
Un X the hidden layers. Position all layers nicely.
Image Resize 80-90% if needed,
Bicubic resample all layers checked.
Add your Artist © and your Name and Walla!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 29th. 2008
Any resemblance to another tutorial is purely coincidental.

♥My Third Award!♥

Wow I Am Again Flattered!
Thank You Mar!♥
I am so excited to recieve this from you!
I never dreamed so many people
would love my blog and my tuts.
I have had almost 6,000 visitors in
just the two weeks I have been here.
I will continue to post as many new tuts as possible!
I will be adding a slide today to
show off tags made with my tuts.
Please e-mail me through my profile
with any tags you want to show off!
I would love to see what you all create!

Now, with this Award,
The rules are that I have
to state seven things
that I love and then pass
this onto seven more blogs.
So here goes!
Seven things I LOVE Are, The Lord, My Fiance' Stoney,
My Family, PSP, My PC, Candles, & The Beach! (of course!)
I am passing this award on to Seven of my Fav Blogs!
Yvette & Missy of Misfits Scrapz ,
Denny of Denz Designz Chas of ChasScrapnBitz
You ALL Deserve It!

Oct 28, 2008

●Simple Beauty●


Click on tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Jennifer Janesko.
You must purchase a license to use her art.
You may do so at CILM.

1 tube of choice & Font of choice.
I used MaryHelenJF.
Mask of choice.

FTU Supplies can be found at Kim B's Designs.
Visit her Blog & Download HERE
Another Awesome FTU kit called Thank You's.
Make sure you get both parts!
Thank you Kim for sharing your wonderful talent
with the psp and scrapping community.
Please when downloading leave a little bit of love
and a thank you, it only takes a sec while
waiting for the upload in 4shared to say thank you!

Another Easy Peasy tut!....Ready, Set, Let's Go!

Open your supplies in PSP.
Open a new canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Copy and paste a paper of choice from
the kit into selection. Select none. Apply a mask,
I used a round mask, and on your layers
pallette merge mask group. Resize & Add frame,
Using magic wand, select inside frame.
Selections>modify>expand 7. Resize & Paste
paper of choice > selections>invert>delete on
your keyboard. Drag paper layer under the frame
& dropshadow frame. Now add your tube of choice.
Drag below the frame layer, position where it
looks best. Dropshadow. Erase any parts hanging
over at the bottom. Now here comes the fun
part! lol Open and Resize any elements you
want to use. I added all the leaves to
the right side under the frame and paper layers.
Dropshadow. Copy and paste some flowers,
and arrange them all around under the frame
as well. Dropshadow. Resize and paste the blue
string above the flowers and leaves. Now add
your staple. Add any other buttons, screws or
bows as new layers. Dropshadow those. Resize
the butterfly rotate & and place to your liking
or see mine for placement. Woot! Arrange all of
your layers to your liking. Now X out the
bottom layer and your mask layer. Merge
visable the remaining layers. Un X the
hidden layers. Position all layers nicely.
Image Resize 80-90% if needed,
Bicubic resample all layers checked.
Add your Artist © and your Name and Wow!!
You Are Done! Enjoy your new tag!
Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 28. 2008
Any resemblance to another tutorial is purely coincidental.


●Friends●

Click on tag to view full image.
I am using the beautuful artwork of Elias Chatzoudis.
You must purchase a license to use this art,
You may do so at MPT
1 tube of choice & Font of choice. I used Riven.
Mask of choice or the one I used,
Weescotslass mask 4 Found HERE TY Sweetie!

FTU Supplies can be found at DSO found, HERE
Another Awesome FTU kit called Precious Friend.
I Don't know how long this will be available.
Visit her Blog HERE
Thank you Kim B for sharing your wonderful
talent with the psp and scrapping community.
Please when downloading leave a little bit of love
and a thank you, it only takes a sec while
waiting for the upload in 4shared to say thank you!

Ready, Set, Let's Go!

Open your supplies in PSP. Open a new canvas 700x700,
You may resize/crop later. Floodfill white.
Add a new raster layer. Selections, select all.
Copy and paste a paper of choice from the kit into
selection. Select none. Apply the mask here,
and on your layers pallette merge mask group.
Resize & Add the frame. Carefully using your
selection tool set to rectangle, outline the
frame just a little larger than the opening.
Now paste another paper of choice as a new
layer, then selections>invert>delete on
your keyboard. Drag paper layer under the frame.
Dropshadow frame. Resize and add one of the
bows and paste as a new layer above the frame,
just at the top of the opening. Duplicate> image>flip.
So it looks like criss crosses. Resize & Copy and paste
the element 15 cutting off the ends to make it
fit the frame. Click on your criss cross ribbons.
Now add tube of choice. Place where it looks
good. Duplicate tube, and bring copy to the top,
& erase any parts you wish. Dropshadow bottom
tube, erase away any extra hanging over. I also
did the same thing with the friends string.
Paste one under the tube, duplicate and bring it
above the tube, erase any parts you need to.
Resize and add any other elements you like.
Resize & Copy & paste the doodles under the
frame and above the mask, using the deform
tool to rotate to your liking. I used 2 pink & 2 blue.
Make it your own, have fun with it! :)
Place all your layers to your liking.
Now X out the bottom layer and your mask layer.
Merge visable the remaining layers.
Un X the hidden layers. Position all layers nicely.
Image Resize 80-90% if needed,
Bicubic resample all layers checked.
Add your Artist © and your Name and Woo-Hoo!!
You Are Done!
Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 28 2008
Any resemblance to another tutorial is purely coincidental.

Oct 27, 2008

●Pink Princess●

Click on the tag to get full view.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Barbara Jensen.
You must purchase a license to use her art.

1 tube of choice & Font of choice. I used TheNautiGal.
Mask of choice. FTU Supplies can be found at
Misfits Scrapz , HERE
An Awesome FTU kit called Snow Princess.
Thank you Yvette for sharing your
wonderful talent with the psp and scrapping
community. Please when downloading leave a
little bit of love and a thank you, it only takes
a sec while waiting for the upload in
4shared to say thank you!

Easy Peasy Tut...Let's do It!!

Open your supplies in PSP. Open a new canvas
700x700, you may resize/crop later. Floodfill white.
Add a new raster layer. Selections, select all.
Copy and paste a paper of choice from the kit
into selection, . Select none. Apply your mask,
and on your layers pallette merge mask group.
Resize & Add a frame. I used the plain
square one. Carefully using your selection tool
set to rectangle, outline the frame. Now paste
another paper of choice as a new layer, then
selections>invert>delete on your keyboard.
Drag paper layer under the frame. Dropshadow frame.
Now click on your paper layer inside your frame
and add tube of choice. Erase any parts hanging
over the bottom. Now get creative and resize
and add some flowers, and any other elements
you like. See mine above. There's tons to work with!
Paste them all as new layers and dropshadow.
Arrange to your liking. Now X out the bottom
layer and your mask layer. Merge visable the
remaining layers. Un X the hidden layers.
Position all layers nicely. Image Resize 80-90% ,
Bicubic resample all layers checked. Add words of choice.
Add your Artist © and your Name and Woo-Hoo!!
You Are Done!
Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 27 2008
Any resemblance to another tutorial is purely coincidental.

Oct 26, 2008

●Carefree●


Click on the tag to view full image.
I am using the beautuful artwork of Jamie Kidd.
You must purchase a license to use this art,
You may do so at CILM

1 tube of choice & Font of choice.
I used SloopScriptThree.
Mask of choice or the one I used,(Again) lol
Weescotslass mask 84 Found HERE TY Sweetie!

FTU Supplies can be found at Dezignz By Ali ,
Under freebies. An Awesome FTU kit called Caring Carrie.
Thank you Ali for sharing your wonderful talent
with the psp and scrapping community.
Please when downloading leave a little bit of love
and a thank you, it only takes a sec while
waiting for the upload in 4shared to say thank you!

Easy Peasy Tut...Let's do It!!

Open your supplies in PSP.
Open a new canvas 700x700, you may
resize/crop later. Floodfill white. Add a new raster
layer. Selections, select all. Copy and paste a
paper of choice from the kit into selection, .
Select none. Apply the mask, and on your layers
pallette merge mask group. Resize & Add a journaling 1.
Image morror. Dropshadow. Now resize and
add journaling 2 and image>rotate to the left 20.
Dropshadow. Now get creative and resize and
add some flowers, butterflies, and any other
elements you like. Paste them all as new layers
and dropshadow. Arrange to your liking.
Add your tube of choice and dropshadow.
I brought a few elements up above the tube.
Resize and add a ribbonbow on top of all the
other layers. Erase the ends off so it looks like
it's wrapping around everything. Dropshadow.
Now X out the bottom layer and your mask layer.
Merge visable the remaining layers.
Un X the hidden layers.
Position all layers nicely.Image Resize 80-90% if needed,
Bicubic resample all layers checked.
Add your Artist © and your Name and Woo-Hoo!!
You Are Done!Told ya it was easy!
Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 25 2008
Any resemblance to another tutorial is purely coincidental.

●Just Peacheee●

Click on tags to get full view.
You must have a working knowledge of PSP.
I am using the beatuful artwork of Jennifer Janesko
for the top tag & Pinuptoons for the bottom tag.
You must have a license to use their work.
You may purchase both at @ CILM

Supplies needed:

1 tube of choice & Font of choice,
I used A&S Snapper Script & Updock.
Mask of choice.
Scrap Supplies can be found at Rachel's
Awesome New Blog Captivated Visions ,
Another Awesome Freebie called Peacheee. Woot!
Thank you Rachel for sharing your wonderful talent
with the psp and scrapping community. Mwahhh!
Please when downloading leave a little bit of
love and a thank you, it only takes a sec while
waiting for the upload in 4shared to say thank you!

This will be quick & easy!...Ready, Set, Let's Go!

Open your supplies in PSP.
Open a new canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Copy and paste a paper of choice from
the kit into selection. Select none. Apply a mask
of choice here, and on your layers pallette
merge mask group. Add A Frame , Using magic
wand, select inside frame.
Selections>modify>expand 6. Paste paper of choice,
and selections>invert>delete on your keyboard.
Drag paper layer under the frame & dropshadow
frame. Resize some flowers and butterflies etc,
and any other embelishments you like. There are
plenty to work with! Place to your liking, see
mine as example, or make it your own. :)
As always mine is just a guide.Add your main tube
and erase any parts hanging over/outside
the frame. Arrange all of your flowers, bow and
other layers to your liking. Now X out the bottom
layer and your mask layer. Merge visable the
remaining layers. Un X the
hidden layers. Position all layers nicely.

Image Resize 80-90% if needed,
Bicubic resample all layers checked.
Add your Artist © and your Name and Walla!!
You Are Done!

Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 26th. 2008
Any resemblance to another tutorial is purely coincidental.

Oct 25, 2008

●Mochalicious●


Click on the tag to view full image.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Pinuptoons.
You must purchase a license to use this art,
You may do so at CILM

1 tube of choice & Font of choice.I used AL Surfboard.
Mask of choice or the one I used,
Weescotslass mask 84 Found HERE TY Sweetie!
FTU Supplies can be found at Delicious Scraps, HERE
An Awesome FTU kit called Mochalicious. TY!
Thank you for sharing your wonderful talent
with the psp and scrapping community.
Please when downloading leave a little bit of love
and a thank you, it only takes a sec while
waiting for the upload in 4shared to say thank you!

Easy Peasy Tut...Let's do It!!

Open your supplies in PSP. Open a new canvas
700x700, you may resize/crop later. Floodfill white.
Add a new raster layer. Selections, select all.
Copy and paste a paper of choice from the kit
into selection, I used paper 1. Select none.
Apply a mask, and on your layers pallette
merge mask group. Resize & Add a frame ,
Using magic wand, select inside frame.
Selections>modify>expand 10. Resize & Paste
paper of choice > selections>invert>delete on
your keyboard. Drag paper layer under the frame
& dropshadow frame. Resize, Copy and paste
the beans and flowers. Place them to your liking
or see mine above. Resize a bow and paste as
a new layer at the top of the frame.
Resize the heart and rotate to the right 20%.
use a light dropshadow. Add your tube of
choice, dropshadow and erase any parts hanging
over. Now add the doodles just above the mask
layer. Arrange how it looks best with your tag.
I typed some words to my tag
Cuz I love my mornings! lol
Or make it your own. Mine is just a guide,
Add any other embelishments you like.
There are plenty to work with! :)

Image Resize 80-90% Bicubic
resample all layers checked.
Add your Artist © and your
Name and WooT!! You Are Done!

Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 25th. 2008
Any resemblance to another tutorial is purely coincidental.

●Cutie●Sweetie●



Click on tag to get full view.
You must have a working knowledge of PSP.
I am using the beatuful artwork of Dean Yeagle.
You must have a license to use his work.
You may purchase @ CILM

Supplies needed:Tube of choice & Font of choice.
I used LD PrettyA Freebie scrapkit from Designer Scraps Livin' Large
By Farrah called Glitter Baby HERE
Mask of choice or the one I used,
Weescotslass mask 84 Found HERE TY!
Thank you for sharing your wonderful talent with
the psp and scrapping community.
Please when downloading leave a little bit of love
and a thank you, it only takes a sec
while waiting for the upload in 4shared to say thank you!

Easy Peasy Tut!...Ready, Set, Let's Go!

Open your supplies in PSP.
Open a new canvas 700x700,
you may resize/crop later. Floodfill white.
Add a new raster layer. Selections, select all.
Copy and paste a paper of choice from the
kit into selection. Select none. Apply the
mask here, and on your layers pallette merge
mask group. Resize & Add the book. Dropshadow.
Now resize and place a few of the vines, using
your deform tool, place one at the top right under
the book and one at the bottom left. I added
a third one on top of the book in the center.
Now add your tube, dropshadow. Resize and paste
any other elements of choice all around the book,
whatever looks good with your tube. Get creative! :)
Add whatever words to the book. Place all your
layers to your liking. Now X out the bottom layer
and your mask layer. Merge visable the
remaining layers. Un X the hidden layers.
Position all layers nicely.Image Resize 80-90% if needed,
Bicubic resample all layers checked.
Add your Artist © and your Name and Woo-Hoo!!
You Are Done!Told ya it was easy!
Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 25 2008
Any resemblance to another tutorial is purely coincidental.

Oct 24, 2008

●Bah Humbug●

Click on tag to view full image.
I am using the beautuful artwork of Elias Chatzoudis.
You must purchase a license to use this art,
You may do so at MPT
1 tube of choice & Font of choice.
I used TheNautiGal, A pay font.
Mask of choice or the one I used,
Weescotslass mask 84 Found HERE
TY Sweetie!
FTU Supplies can be found at Candys Treats
HERE
An Awesome Freebie addon Called O Christmas Tree.
Thank you Diane for sharing your wonderful talent
with the psp and scrapping community.
Please when downloading leave a little bit of love
and a thank you, it only takes a sec while
waiting for the upload in 4shared to say thank you!
Easy Peasy Tut...Let's do It!!
Open your supplies in PSP. Open a new canvas 700x700,
you may resize/crop later. Floodfill white.
Add a new raster layer. Selections, select all.
Copy and paste a paper of choice from the kit
into selection. Select none. Apply the mask here,
and on your layers pallette merge mask group.
Resize & Add the frame. Carefully using your
selection tool set to rectangle, outline the frame
just a little larger than the opening. Now paste
another paper of choice as a new layer,
I used the black Bah Humbug one,
then selections>invert>delete on your keyboard.
Drag paper layer under the frame. Dropshadow
frame. Now click on your paper layer inside your
frame and add tube of choice. Place where it looks
good. Duplicate tube, and bring copy to the top,
& erase any parts you wish. Dropshadow bottom
tube, erase away any extra hanging over.
Resize the snowflakes and paste as a new layer just
above the masked layer. Also add a ribbon & any
other elements you like. Dropshadow those.
Now X out the bottom layer and your mask layer.
Merge visable the remaining layers.
Un X the hidden layers. Position all layers nicely.
Image Resize 80-90% if needed,
Bicubic resample all layers checked.

Add your Artist © and your Name and Woo-Hoo!!
You Are Done!
Told ya it was easy!
Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 24 2008
Any resemblance to another tutorial is purely coincidental.

Oct 23, 2008

●I Love Winter●

You must have a working knowledge of PSP.
I am using the beautiful artwork of Suzanne Woolcott
Under licence number AMIGAHA
You will need a licence to use Suzanne's work
which can now be obtained from HERE
Mask is from UrbanFairyTales UFMask7 , found: HERE
Thank you Sunf!
FTU Supplies can be found at SimplySensationalScraps,
HERE
An Awesome FTU kit called Frost Yourself.
Thank you Lorna & Sunf for sharing your wonderful
talent with the psp and scrapping community. Mwahh!
Please when downloading leave a little bit of love
and a thank you, it only takes a sec while
waiting for the upload in 4shared to say thank you!
Easy Peasy Tut...Bundle up & Let's Do It!!
Open your supplies in PSP.
Open a new canvas 700x700,
You may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all. Copy and paste a paper
of choice from the kit into selection. Select none.
Apply the mask and on your layers pallette
merge mask group. Now add a round frame of
choice. Resize it so its just a little smaller than
your masked layer. Using magic wand, select
inside frame. Selections>modify>expand 6.
Paste paper of choice, > selections>invert>delete
on your keyboard. Drag paper layer under the
frame & dropshadow frame. Now add your tubes
of choice. Drag below the frame layer, and above
paper layer & position them where they look best.
Dropshadow. I resized a few snowflakes and
placed them under the tubes layer also. Now under
the masked layer, copy and paste the clouds all
around the frame, using the mirror and flip and
and rotate a few 90% so they are all around it.
Copy and paste the branches and ivy, using
your deform tool how they look best. Resize a
few flowers , bows, trees, and any other elements
you want to use. Make it your own,
This is a fun kit! Mine is just a guide. :)
Paste as new layers all around
your frame and dropshadow.
Now for the wordart...Ya ready?
Open and resize the word Winter from the kit.
Using your selections tool set to rectangle,
go around a snowflake and edit copy, then paste
that on your canvas twice, so you have two,
making sure you are on your top layer.
Then back to the word Winter, select none, and
once again using your selections tool, go around
the letter I from Winter & edit copy and paste
that as a new layer on your canvas. Now also
paste the word winter as a new layer on your tag.
Resize a scalloped heart and paste as a new layer.
Now arrange those layers on your tag so it says
"I heart Winter", see mine above.
Arrange all of your layers to your liking.
Now X out the bottom layer and your mask layer.
Merge visable the remaining layers.
Un X the hidden layers. Position all layers nicely.
Image Resize 80-90% Bicubic resample all layers checked.
Add your Artist © and your Name and WooT!!
You Are Done! Enjoy your new tag!

Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 23rd. 2008
Any resemblance to another tutorial is purely coincidental.

Oct 22, 2008

●Denim Fun●


Click tag to get full image.
You must have a working knowledge of PSP.
I am using the beatuful artwork of Dean Yeagle.
You must have a license to use his work.
You may purchase @ CILM1 or 2 tubes of choice & Font of choice.
I used 2Peas Chatter. A Pay font..

Mask is from UrbanFairyTales UFMask13 , found: HERE .
Thank you Sunf! .
FTU Supplies can be found at Boundless Bliss Scraps, HERE
Another Awesome FTU kit called Grunged Denim.
Thank you Theresa & Sunf for sharing your wonderful talent
with the psp and scrapping community.
Please when downloading leave a little bit of love
and a thank you, it only takes a sec while waiting
for the upload in 4shared to say thank you!

This will be quick & easy!...Ready, Set, Let's Go!

Open your supplies in PSP.
Open a new canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections,
select all. Copy and paste a paper of choice from
the kit into selection. Select none. Apply the mask
and on your layers pallette merge mask group.
Now repeat that step with a different paper.
I used one red & one blue. Then Image mirror.
Resize and paste the bluejean pocket, image rotate
to the left 15. Dropshadow. Hold down the
shift key and grab your magic wand,
click indide both open areas of the pocket.
Selections>modify>expand>6.
Paste another paper of choice as a new layer,
selections>invert>delete. Select none.
Drag paper under your pocket. Now add your
tube of choice. Drag below the frame layer, position it
where it looks best. Dropshadow. Duplicate the
tube and bring the duplicated layer to the top.
Erase any parts you dont want hanging over.
The second tube I left her under the frame.
Resize the flowers and buttons and the bow.
I duplicated a button and colorized it.
Paste as new layers and dropshadow.
Place to your liking, make it your own! :)
Resize the button ribbon and paste as a new layer
at the bottom of the pocket. Rotate to the left
a little, dropshadow. Duplicate and mirror.
Arange however it looks best with your tag.
Finally add the doodle under your pocket, and
above the masked layers. Duplicate and mirror,
place those to your liking as well.
Now X out the bottom layer and your mask layers.
Merge visable the remaining layers.
Un X the hidden layers.
Position all layers nicely.Image Resize 80-90% if needed,
Bicubic resample all layers checked.
Add your Artist © and your Name and Woo-Hoo!!
You Are Done!Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 22 2008
Any resemblance to another tutorial is purely coincidental.

●Ordinary Day●

You must have a working knowledge of PSP.
I am using the beautuful artwork of Jennifer Janesko.
You must purchase a license to use her art, you may do so at CILM.
1 tube of choice & Font of choice. I used Young Love ES.
Mask is from UrbanFairyTales UFMask14 found: HERE
Thank you Sunf! .
FTU Supplies can be found at Boundless Bliss Scraps, HERE
An Awesome FTU kit called Ordinary Day.
Thank you Theresa & Sunf for sharing your
Amazing talent with the psp and scrapping community.
Please when downloading leave a little bit of love
and a thank you, it only takes a sec while
waiting for the upload in 4shared to say thank you!
This will be quick & easy!...Ready, Set, Let's Go!
Open your supplies in PSP. Open a new canvas 700x700
You may resize/crop later. Floodfill white.
Add a new raster layer. Selections, select all.
Copy and paste a paper of choice from the kit into selection.
Select none. Apply the mask and on your
layers pallette merge mask group.
Resize and paste the frame as a new layer.
Carefully using your selection tool set to rectangle,
outline the frame. Now paste another paper
of choice as a new layer, then selections>invert>delete
on your keyboard. Select none. Drag paper layer under the
frame. Dropshadow frame. Now click on your
paper layer inside your frame and add tube of
choice. Place to your liking,
Duplicate the tube, and bring copy to the top,
& erase any parts you wish. Dropshadow bottom
tube, erase away any extra hanging over.
Resize some flowers and place around where
they look best. Resize the green tag and place
in the upper corner of your frame. Erace parts so
it looks like its hanging from he frame. Dropshadow.
Arrange all layers to your liking and x out
white background layer, and mask layer.
Then layers> merge visable. Un X all layers.
Position all layers nicely.Image Resize 80-90% if needed,
Bicubic resample all layers checked.
Add your Artist © and your Name and WooT!!
You Are Done!
Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 22ond. 2008
Any resemblance to another tutorial is purely coincidental.

Oct 21, 2008

●Charmeuse●


Click on the tag to view full size.
You must have a working knowledge of PSP.
I am using the beautuful artwork of Jennifer Janesko.
You must purchase a license to use her art, you may do so at CILM.
3 tubes of choice & Font of choice.
I used Inspiration, A PTU font. Mask of choice.

FTU Supplies can be found at
Irene's Scrapbooking Digital Designs, HERE
Another Awesome FTU kit called Charmeuse.
Thank you Irene for sharing your wonderful talent
with the psp and scrapping community.
Please when downloading leave a little bit of love
and a thank you, it only takes a sec while
waiting for the upload in 4shared to say thank you!

Ready, Set Go!!
Open your supplies and minimize for now.
Open a new canvas 700x700, you may resize later.
Floodfill white. Add a new raster layer and select all.
Resize (smartsize) & Paste a paper of choice into selection.
Select none. Apply Mask of choice and merge
group on mask layer. I added a Texture>weave
effect to mine. 2,9,1 Weave & gap color white,
fill gaps checked. Resize and add the frame.
Using magic wand, hold down the shift
key and select inside all three frames.
Selections>modify>expand 5 and paste paper
of choice as a new layer. Selections invert delete
on your keyboard. Drag paper under frame layer.
Now click in side each frame and using the same
technique, add your tubes of choice, one frame
at a time. dropshadow tubes and frame. Make sure
your tube layers are under your frame. X out the
mask layer and the bottom layer, and merge
visable. Un x bottom layers now. Resize the
bow, stringflowers, fabricflowers, and any other
elements you want to use. Use your deform tool
to place where you think it looks best, see mine
for example. Dropshadow those. Arrange all of your
layers to your liking. Now X out the bottom layer
and your mask layer. Merge visable the remaining layers.
Un X the hidden layers. Position all layers nicely.
Image Resize 80-90% if needed, Bicubic resample all layers checked.
Add your Artist © and your Name and Wow!!
You Are Done! Enjoy your new tag!
Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 21st. 2008
Any resemblance to another tutorial is purely coincidental

Oct 20, 2008

●Rock Star●

Click on Image to view full size tag.
I am using the beautuful artwork of Elias Chatzoudis.
You must purchase a license to use this art.

You may do so at MPT1 tube of choice & Fonts of choice.
I used New Romantics for my name
and PhyllisIniD fo the words. Mask of choice.
Don't know where the one I used cam from sorry.

FTU Scrap Supplies can be found at
Irene's Scrapbooking Digital Designs, HERE
An Awesome FTU kit called Cozy Grundge.
Thank you Irene for sharing your wonderful
talent with the psp and scrapping community.
Please when downloading leave a little bit of
love and a thank you, it only takes a sec while
waiting for the upload in 4shared to say thank you!

Easy Peasy Tut...Let's do It!!
Open your supplies and minimize for now.
Open a new canvas 700x700, you may resize later.
Floodfill white. Add a new raster layer and select all.
Resize smartsize & Paste a paper of choice into selection.
Select none. Apply Mask of choice and merge group
on mask layer. Resize and paste the
linnen patch as a new layer.
Rotate to the right 90. Then resize and paste the
crumplednotepaper on top of that. Rotate 15 to the left,
or use your deform tool. Resize and add the
cardboard strip, and arrange with your deform
tool it so its even with the crumpled paper.
See mine above. Resize and paste the ribbon frame
as a new layer, and using magic wand click inside
frame and selections>modify>expand 6.
Then resize and paste a paper of choice as a new
layer then selections> invert and delete on
your keyboard. Drag paper under frame layer.
Dropshadow frame. Resize and add the staple
ribbon. Arrange to your liking. Resize and add the
stitched tag and the cardboard star as new
layers, dropshadow. Mirror both of those,
See mine for placement. Ok now...
Add your tube of choice, then go toEffects>
Artist effects>SepiaToning<60.>
Dropshadow tube.
Image Resize 80-90% if needed, Bicubic resample
all layers checked.
Now Add wording of choice.
Add your Artist © and your Name and WooT!!
You Are Done!
Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches Octoberber 20th 2008
Any resemblance to another tutorial is purely a coincidence.

●Life Is A Blessing●


Click on the tag to get the full image.
I am using the beautuful artwork of Ismael Rac.
You must purchase a license to use this art.
You may do so at MPT
1 tube of choice & Font of choice. FTU Supplies
can be found at Mar's Blog, Scrapping-Mar
An Awesome kit called Blessings.
Thank you Mar for sharing your wonderful talent
with the psp and scrapping community.
Please when downloading leave a little bit of love
and a thank you, it only takes a sec while
waiting for the upload in 4shared to say thank you!
Easy Peasy Tut...Let's do It!!
Open your supplies in PSP.
Open a new canvas 700x700,
You may resize/crop later. Floodfill white.
Add a new raster layer. Selections, select all.
Copy and paste a paper of choice from the kit
into selection. Select none. Apply a mask of choice
here, ( I used a round shaped mask ) and on
your layers pallette merge mask group.
Add Frame12 , Using magic wand, hold down the
shift key & select inside all open areas of the frame.
Selections>modify>expand 6. Paste paper of
choice I used paper7, and selections>invert>delete
on your keyboard. Drag paper layer under
the frame & dropshadow frame. Resize some
flowers and the leaves and any other embelishments
you like. Place where you think it looks good.
I placed some behind the frame and also
above it. I placed some in the frame over the
paper layer, see above. Dropshadow those.
Now add your tube of choice. Drag below
the frame layer, position it where it looks best.
Dropshadow. Duplicate the tube and bring the
duplicated layer to the top. Erase any parts hanging
over and parts covering your ribbon. I added the
wordart Life Is A Blessing over my tube. Arrange
all of your flowers and leaves to your liking.
Careful not to move the tube layers.
Now X out the bottom layer and your mask layer.
Merge visable the remaining layers.
Un X the hidden layers.
Position all layers nicely.Image Resize 80-90% if needed,
Bicubic resample all layers checked.
Add your Artist © and your Name and Walla!!You Are Done
!Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 20th. 2008
Any resemblance to another tutorial is purely coincidental.

Oct 19, 2008

●Some Of My Friends Are Flakes!●


Click on tag to get full Preview.
I am using the beautiful artwork of Suzanne Woolcott
I am under licence number AMIGAHA you will also need
a licence to use Suzanne's work which can now
be purshased from www.gorjuss.co.uk
2 tubes of choice & Font of choice. I used A&S Speedway.
Round Mask of choice. FTU Supplies can be found at
BlueDream Designs, HERE
An Awesome FTU kit called Winter Wonderland.
Thank you Bluey for sharing your wonderful talent with
the psp and scrapping community. Please when downloading
leave a little bit of love and a thank you, it only takes a sec
while waiting for the upload in 4shared to say thank you!
Easy Peasy Tut...Let's Goooo!Open your supplies in PSP.
Open a new canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer. Selections, select all.
Copy and paste a paper of choice from the kit into selection,
I used paper 1. Select none. Apply a mask, and on your
layers pallette merge mask group.
Resize & Add frame 1 , Using magic wand, select inside frame.
Selections>modify>expand 15. Resize & Paste paper
of choice , I used paper 5,> selections>invert>delete on
your keyboard. Drag paper layer under the frame &
dropshadow frame. Now add your tubes of choice.
Drag below the frame layer, position them where they
look best. Dropshadow. Duplicate the tubes and
bring the duplicated layers to the top. Erase any parts
hanging over at the bottom and over the bow.
Paste Bow 2 and place to the top right of the frame,
dropshadow. Duplicate and resize 70% and place that
one near the bottom right of the frame. Resize some
Let it snow glass buttons of choice and place over the bows.
Resize the heart and another glass button for the top
left of the frame. See mine above for placement.
You can use your deform toll to angle them how you wish.
I typed some words to my tag.
Cuz some of my friends ARE Flakes! lol
Or make it your own. Mine is just a guide.
Add any other embelishments you like.
There are plenty to work with! :)Image Resize 80-90%
Bicubic resample all layers checked.
Add your Artist © and your Name and WooT!!
You Are Done!
Hope you enjoyed my tutorial & thanks for trying it! :)
Written by Beaches October 19th. 2008
Any resemblance to another tutorial is purely coincidental.

●Who?●


Click on tags to view full size.
I am using the beautuful artwork of Ismael Rac.
You must purchase a license to use this art,
You may do so at MPT
1 tube of choice & Font of choice.
I used Wisper.
Mask of choice or the one I used,
Weescotslass mask 84 Found HERE TY Sweetie!
FTU Supplies can be found at Delicious Scraps, HERE
An Awesome FTU kit called Cherry On Ice.
Thank you for sharing your wonderful talent with the
psp and scrapping community. Please when downloading
leave a little bit of love and a thank you, it only takes
a sec while waiting for the upload in 4shared to say thank you!

Easy Peasy Tut...Let's do It!!
Open your supplies in PSP. Open a new canvas 700x700,
You may resize/crop later. Floodfill white.
Add a new raster layer. Selections, select all.
Copy and paste a paper of choice from the kit into selection.
Select none. Apply your mask here, and on your layers
pallette merge mask group. Resize & Add the white frame,
Using magic wand, select inside frame.
Selections>modify>expand 6.
Resize smartsize & Paste paper of choice ,
and selections>invert>delete on your keyboard.
Drag paper layer under the frame & dropshadow.
Now choose a ribbon, resize and paste over top
of the frame layer. Using the freehand tool carefully
erase the parts hanging over the sides.
Add other flowers, butterflies, ribbons,
and doodles to make it your own, or see mine
above for placement. Now add your tube of choice.
Drag below the frame layer, position it where it
looks best. Dropshadow. Duplicate the tube
and bring the duplicated layer to the top.
Erase any parts hanging over and parts
covering your ribbon. I left her arm out.
Type words of choice on her shirt, if you used
the same tube. Or make it your own.
Mine is just a guide, and any other embelishments you like.
There are plenty to work with! :)
Image Resize 80-90% Bicubic resample all layers checked.

Add your Artist © and your Name and WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it! :)

Written by Beaches October 19th. 2008
Any resemblance to another tutorial is purely coincidental.

Oct 18, 2008

●Sweet Beauty●



I am using the beautuful artwork of Joe Cano.
You must purchase a license to use this art, you may do so at MPT
1 tube of choice & Font of choice.
FTU Supplies can be found at Mar's Blog, Scrapping-Mar
An Awesome kit called Sweet.
Thank you Mar for sharing your wonderful talent
with the psp and scrapping community.
Please when downloading leave a little bit of love
and a thank you, it only takes a sec while
waiting for the upload in 4shared to say thank you!

Easy Peasy Tut...Let's do It!!
Open your supplies in PSP.
Open a new canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all. Copy and paste a paper
of choice from the kit ( I used paper7 ) into selection.
Select none. Apply a mask of choice here,
( I used a floral mask ) and on your layers
pallette merge mask group. Add Frame42 ,
Using magic wand, select inside frame.
Selections>modify>expand 6. Paste paper of choice
I used paper3, and selections>invert>delete on
your keyboard. Drag paper layer under the
frame & dropshadow frame. Resize some flowers
and butterflies and any other embelishments you like.
There are plenty to work with!Place to your liking,
see mine as example, or make it your own. :)
Add your main tube and erase any parts
hanging over/outside the frame.
Now arrange your layers.
Image Resize 80-90% Bicubic resample all layers checked.

Add your Artist © and your Name and WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it! :)

Written by Beaches October 18th. 2008
Any resemblance to another tutorial is purely coincidental.

●Ooopsie●

I am using the beautuful artwork of Pinuptoons.
You must purchase a license to
use this art, you may do so at CILM

1 tube of choice & Font of choice, I used A&S Wizzard.
Supplies can be found at :
Rachel's Awesome New Blog Captivated Visions
An Awesome Freebie called Colour Matters.
Her very first scapkit! Woot!
Thank you Rachel for sharing your wonderful talent
with the psp and scrapping community.
Please when downloading leave a little bit of
love and a thank you, it only takes a sec while waiting
for the upload in 4shared to say thank you!

This will be quick & easy!...Ready, Set, Let's Go!
Open your supplies in PSP. Open a new
canvas 700x700, you may resize/crop later.
Floodfill white. Add a new raster layer.
Selections, select all. Copy and paste a paper
of choice from the kit into selection. Select none.
Apply a mask of choice here, ( I used a round shaped mask )
and on your layers pallette merge mask group.
Add CVFrame03, Using magic wand, select inside circle.
Selections>modify>expand 8. Paste paper of choice,
and selections>invert>delete on your keyboard.
Drag paper layer under the circle & dropshadow.
Paste CVFrame01 on top over those. Dropshadow.
Resize some CVButtons and CVStickers (flowers)
and place them around your frame to your liking.
Add elements of choice from the kit. I used the
CVBow01 & The CVTwisted Ribbons 1 & 2.
Resize and move around with your deform tool.
Dropshadow all layers. Then I added
CVDoodle 2 above the mask layer, and below the frames.
Duplicate and mirror & flip. Place to your liking.
Back to top layer, Add your tube of choice,
dropshadow, and position where you want it.
Dupicate the tube, drag the original tube layer
below the frames, the duplicated tube should
be above the frame layers. Erase any parts
you wish on top tube layer. I erased a part of her leg.
Arrange all layers to your liking and x out white
background layer, and mask layer and doodles,
Then layers> merge visable. Un X all layers.
Position all layers nicely.
Image Resize 80-90% if needed,
Bicubic resample all layers checked.

Add your Artist © and your Name and WooT!!
You Are Done!
Hope you enjoyed my tutorial & thanks for trying it! :)

Written by Beaches October 18th. 2008
Any resemblance to another tutorial is purely coincidental.

♥♥A New Award♥♥

Oh My Goodness! :O
Yet Another Award!
From Denny at Denz Designz
I am so flattered! Thank Youuu sooo much!!♥
Now - I am passing this award
on to A very good friend Rachel!
She has just created her very
first scrapkit and its simply amazing!
I present this award to her
for her awesome blog, Captivated Visions
Muahhhhh!
Big Hugz..Beaches

Oct 14, 2008

OMG! What A Supprise!

WooT!
I was presented an award my first day of opening my new blog!
Thank you sooo much Chas ♥
This award was given to me by Chas of ChasScrapnBitz!
Big Hugz..B.

●Spooktacular●



You must have a working knowledge of PSP.
I am using the beautuful artwork of Barbara Jensen.
You must purchase a license to use her art.

Supplies needed, 1 tube of choice, mask of choice
& Font of choice, (I used Inspiration)
a pay font I can not share.
Scrapkit by Becca at All The Little Things.
A Freebie kit you may downlod HERE
Thank you Becca for sharing your wonderful
talent with the psp and scrapping community.
Please when downloading leave a little bit of love
and a thank you, it only takes a sec
while waiting for the upload in 4shared to say thank you!

Open your supplies and minimize for now.
Open a new canvas 700x700, you may resize later.
Floodfill white. Add a new raster layer and select all.
Resize & Paste a paper of choice into selection.
Select none. Apply Mask of choice and merge
group on mask layer. Now Paste the circle frame
as a new layer. Using magic wand, select
inside circle frame. Selections>modify>expand 8.
Paste paper of choice, and selections>invert>delete
on your keyboard. Drag paper layer under
the frame. I applied a texture weave effect to my paper.
It's up to you. Dropshadow frame. Resize &
add some flowers & buttons of choice around
the frame, on both sides. I resized a bow and
added to my flowers. Dropshadow. Resize and
add the ghost & pumpkin. Dropshadow.
Resize and add the wordart where it looks best.
Light dropshadow. Now click on your paper layer
inside your frame and add tube of choice. erase
any bits hanging out . Resize a journaltab and
paste as a new layer at the bottom. Image
Resize 85-90% Bicubic resample all layers checked.

Add your Artist © and your Name and WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it! :)

Written by Beaches October 1st. 2008
Any resemblance to another tutorial is purely coincidental.

●Beautiful Nature●


You must have a working knowledge of PSP.
I am using the beautuful artwork of Pinuptoons.
You must purchase a license
to use this art, you may do so at CILM
1 tube of choice & Font of choice.
Supplies can be found at Sunf's Awesome Urbanfairytales ,
An Awesome Freebie called Nature Mini and UFMask12 ,
found: HERE Scroll down a bit.
Thank you Sunf for sharing your wonderful talent with
the psp and scrapping community.
Please when downloading leave a little bit of love
and a thank you, it only takes a sec while waiting
for the upload in 4shared to say thank you!

This will be quick & easy!...Ready, Set, Let's Go!
Open your supplies in PSP. Open a new canvas 700x700,
you may resize/crop later. Floodfill white.
Add a new raster layer. Selections, select all.
Copy and paste a paper of choice from
the kit into selection. Select none.
Apply a mask of choice here,
( I used a round shaped mask )
and on your layers pallette merge mask group.
Add another new raster layer, repeat steps
above, and add another paper. Colorize this one
to match your tag. Apply Sunf's UFMask12 and
again merge group on mask layer.
Open the Circle NatureTag and resize
smartsize 120% two times.
Rotate 90 to the left. Sharpen.
Paste as new layer over your masked layers.
Add your tube of choice. Add the Nature
cluster and the leaves, I also resized these 120,
placing all layers to your liking, hiding the
open circle on the round tag. I duplicated the leaves.
Resize a heart button or two and paste as new layer.
Arrange all your layers how they look best
with your tube. Add the smaller Naturetagstring
and erase part of the string so it appears to
be hanging from the second mask layer,
see mine for example. Add wording of choice.
Image Resize 80-90% if needed,
Bicubic resample all layers checked.

Add your Artist © and your Name and WooT!!
You Are Done!
Hope you enjoyed my tutorial & thanks for trying it! :)

Written by Beaches September 28th 2008
Any resemblance to another tutorial is purely a coincidence.

●Magically Charmed●


I am using the Beautiful artwork of Jennifer Janesko,
You must have a license to use her work,
which you can purchase at CILM
Supplies needed: 2 tubes of choice. “Pewter”
scrapkit by Lisa of Sophisticated Scrapz. Thanks hun!
Font I used was MrsBlackfort.
Can not supply, it's a pay font.
WSL_Mask84 by Chelle.
Download the masks from her awesome site here. TY Chelle!
Supplies:
HERE

Let's Go!
Open the supplies in PSP and minimize for now.
Open a new canvas 700x700 floodfill white.
resize and add a paper of choice as a new layer
from the kit. Apply mask and merge group in
layers pallette. Open three different papers of
choice and resize. In your materials pallette,
set your background to one of the papers I have
supplied, forground null. Using your preset tool,
set to rectangle, draw out a rectangle, convert
to raster & move to the left of the canvas.
Switching papers, making it your foreground,
background null, Draw an outline for the rectangle,
width 18. Convert to raster & Dropshadow.
Add tube of choice inside rectangle layers,
dropshadow. I used a standing tube.
Erase any parts hanging over. Using your Elispe tool,
swiching papers again.. draw out a medium
sized circle, see mine above. Convert to raster
layer & Dropshadow of choice. Now set your
forground layer to a different paper, background null.
Width set to 20. Draw out another circle around
the first one, convert to raster, and dropshadow.
Now place these where you think they look best
or like mine above. Resize and copy and paste
the round frame from the kit. Place it so it looks
like its attached to the cirlce we just made.
Click inside frame with the magic
wand>selections>modify>expand by 8.
Paste your tube or image of choice,
I used a large face. >selections>invert>delete on
your keyboard. Dropshadow the tube & frame
and drag your tube below the frame layer.
Now simply resize some embelishments of choice,
placing them where you think they look best
all around your canvas, and dropshadow.
Arrange all layers to your liking and x out white background layer,
and merge visable. Un X bottom layer.
Position your merdged layer nicely.
Image Resize 80-90% if needed,
Bicubic resample all layers checked.

Add your Artist © and your Name and WooT!! You Are Done!
Hope you enjoyed my tutorial & thanks for trying it! :)

Written by Beaches February 15th 2008
Any resemblance to another tutorial is purely coincidental.
Related Posts with Thumbnails